 | |
| Illustration 1 | g01727974 |
Displacement per revolution ... 56 cc (3.42 cubic inch)
Rotation ... Clockwise
System relief pressure at flow rate of 115 L/min (30 US gpm) at 50 °C (122 °F) ... 45000 ± 1000 kPa (6525 ± 145 psi)
Setting for the pressure override relief valve ... 42500 ± 1000 kPa (6162 ± 145 psi)
 | |
| Illustration 2 | g01832654 |
(1) Torque for five bolts ... 10.4 N·m (90 lb in)
(2) Torque for the special bolt ... 6.1 N·m (55 lb in)
(3) Torque for two O-ring plugs ... 5 N·m (45 lb in)
(4) Torque for four bolts ... 205 N·m (150 lb ft)
(5) Torque for the relief valve group ... 35 N·m (26 lb ft)
(6) Torque for two relief valves ... 150 ± 10 N·m (110 ± 7 lb ft)
(7) Torque for two sealing locknuts ... 22 ± 3 N·m (16 ± 2 lb ft)
(8) As required, use the following shims for the installation of the lever in order to maintain a gap of 0.5 ± 0.2 mm (0.02 ± 0.01 inch):
-
233-9808 Shim
- Quantity ... 1
- Thickness of the shim ... 0.60 mm (0.024 inch)
-
216-4551 Shim
- Quantity ... 1
- Thickness of the shim ... 0.8 mm (0.03 inch)
-
216-4552 Shim
- Quantity ... 1
- Thickness of the shim ... 1.0 mm (0.04 inch)
-
216-4553 Shim
- Quantity ... 1
- Thickness of the shim ... 1.2 mm (0.05 inch)
-
216-4554 Shim
- Quantity ... 1
- Thickness of the shim ... 1.4 mm (0.06 inch)
-
216-4555 Shim
- Quantity ... 1
- Thickness of the shim ... 1.6 mm (0.06 inch)
(9) Torque for the proportional solenoid group ... 50 N·m (37 lb ft)
(10) Torque for the throttle valve ... 20 N·m (15 lb ft)
(11) Torque for the plug ... 70 ± 10 N·m (50 ± 7 lb ft)
(12) Torque for six bolts ... 3.1 N·m (27 lb in)