Relief Valve (Transmission Main) - Assemble
组装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-1853 | 挡圈钳 | |
- 将节流孔螺栓 (20) 安装到滑阀 (15) 中。
Show/hide table
 | |
| 图 1 | g01432001 |
- 将钢珠 (17) 、弹簧 (18) 和挡圈 (19) 安装到滑阀 (15) 中。
Show/hide table
 | |
| 图 2 | g01431992 |
- 使用工具 (A) 将挡圈 (16) 安装到滑阀 (15) 上。
Show/hide table
 | |
| 图 3 | g01431978 |
Show/hide table
 |
弹簧压缩零件如果安装不当，会伤害人体。 为避免伤害，遵照出版的装配程序，并穿上保护装备。 |
- 将滑阀 (15) 安装到安全阀 (1) 上。
Show/hide table
 | |
| 图 4 | g01431971 |
- 安装弹簧 (13) 和止动块 (14) 。
Show/hide table
 | |
| 图 5 | g01431963 |
- 将 O 形密封圈 (12) 安装到安全阀 (1) 上。
Show/hide table
 | |
| 图 6 | g01431960 |
- 如有必要，将螺栓 (11) 安装到盖 (10) 中。 确保将螺栓 (11) 安装到拆解时记录的长度。
Show/hide table
 | |
| 图 7 | g01431958 |
- 将盖 (10) 放置到安全阀 (1) 上。 安装螺栓 (9) 。 拧紧螺栓 (9) 至 28 ± 7 N·m (21 ± 5 lb ft) 的扭矩。
Show/hide table
 | |
| 图 8 | g01431957 |
Show/hide table
|
弹簧压缩零件如果安装不当，会伤害人体。 为避免伤害，遵照出版的装配程序，并穿上保护装备。 |
- 将 O 形密封圈 (8) 安装到调整盖 (7) 上。
Show/hide table
 | |
| 图 9 | g01431949 |
- 将调整盖 (7) 放置到位，然后安装螺栓 (6) 。 拧紧螺栓 (6) 至扭矩为 28 ± 7 N·m (21 ± 5 lb ft)。
Show/hide table
 | |
| 图 10 | g01431947 |
- 将缓动阀 (5) 安装到安全阀 (1) 上。
Show/hide table
 | |
| 图 11 | g01431857 |
- 将 O 形密封圈 (4) 安装到螺塞 (3) 上。
Show/hide table
 | |
| 图 12 | g01431853 |
- 安装塞 (3) 。 拧紧螺塞 (3) 至扭矩为 225 ± 15 N·m (165 ± 11 lb ft)。
Show/hide table
 | |
| 图 13 | g01431848 |
- 将接头 (2) 和 O 形密封圈安装到安全阀 (1) 上。 拧紧接头 (2) 至扭矩为 35 ± 3 N·m (26 ± 2 lb ft)。
Show/hide table
 | |
| 图 14 | g01431844 |
End By: 安装主安全阀。
Caterpillar Information System:
450E Backhoe Loader Hydraulic and Steering System Gear Pump (Implement)
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Features
785D Off-Highway Truck Hydraulic System General Information
AP655D Asphalt Paver Machine Systems Hydraulic Schematic (Auger and Conveyor System)
785D OEM Off-Highway Truck Hydraulic System Gear Pump (Torque Converter and Parking Brake Release)
R1700G Load Haul Dump Indicators
2008/04/07 Correction to Systems Operation Troubleshooting Testing and Adjusting , "System Schematic" {1400, 4800, 7566}
2008/06/09 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 081 - CID 0638 - FMI 06" {1467}
R1700G Load Haul Dump Braking System Brake Release System
Procedure to Rework Loader Buckets for Use with Fusion Couplers {6001, 6129, 6434} Procedure to Rework Loader Buckets for Use with Fusion Couplers {6001, 6129, 6434}
R1700G Load Haul Dump Hydraulic System Ride Control System
R1700G Load Haul Dump Hydraulic System Main Hydraulic System
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0368 - FMI 02
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0590 - FMI 14
AP655D Asphalt Paver Machine Systems Conveyor Speed (Auger) - Check
785D OEM Off-Highway Truck Air System and Brakes Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission)
120M and 12M Motor Grader Machine Systems Control Valve (Brake) - Remove
120M and 12M Motor Grader Machine Systems Control Valve (Brake) - Install
2008/01/21 A New Lubricator for the Air Starting Motor is Available {1451}
797F Off-Highway Truck Power Train Screen (Transmission Scavenge) - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System Switch Circuits
24M Motor Grader Machine Systems Bank Valve - Disassemble
24M Motor Grader Machine Systems Bank Valve - Assemble
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0428 - FMI 03