Flywheel
Usage:
Remove And Install Flywheel
1. Fasten a hoist to tooling (A), and install tooling (A) to the flywheel with bolt (1).
2. Remove bolts (2) that hold the flywheel to the crankshaft, and remove the flywheel. The weight of the flywheel is 59 kg (130 lb.).
NOTE: The following steps are for installation of the flywheel.
3. Fasten a hoist and tooling (A) to the flywheel with bolt (1).
4. Put the flywheel in position on the dowel of the crankshaft, and install the bolts that hold it. Tighten the bolts to a torque of 270 ± 25 N·m (200 ± 18 lb.ft.).
Caterpillar Information System:
3406B INDUSTRIAL & MARINE ENGINES Timing Gear Cover
3406B INDUSTRIAL & MARINE ENGINES Cylinder Liners
3406B INDUSTRIAL & MARINE ENGINES Timing Gears And Plate
3406B INDUSTRIAL & MARINE ENGINES Camshaft
3406B INDUSTRIAL & MARINE ENGINES Crankshaft Rear Seal And Wear Sleeve
3406B INDUSTRIAL & MARINE ENGINES Crankshaft Front Seal And Wear Sleeve
3406B INDUSTRIAL & MARINE ENGINES Camshaft Bearings
3406B INDUSTRIAL & MARINE ENGINES Crankshaft
3406B INDUSTRIAL & MARINE ENGINES Pistons And Connecting Rod Assemblies
3406B INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
3406B INDUSTRIAL & MARINE ENGINES Connecting Rod Bearings
3406B INDUSTRIAL & MARINE ENGINES Piston Cooling Tubes
3406B INDUSTRIAL & MARINE ENGINES Flywheel Housing
SR4 GENERATOR MOUNTED CONTROL PANEL Identification
SR4 GENERATOR MOUNTED CONTROL PANEL Abbreviations & Symbols
SR4 GENERATOR MOUNTED CONTROL PANEL How To Read Control Panel DC Schematics
SR4 GENERATOR MOUNTED CONTROL PANEL Components
SR4 GENERATOR MOUNTED CONTROL PANEL Introduction
SR4 GENERATOR MOUNTED CONTROL PANEL Automatic Start/Stop Control Panel
SR4 GENERATOR MOUNTED CONTROL PANEL Manual Start/Stop Control Panel
3176 DIESEL TRUCK ENGINE MECHANICAL TROUBLESHOOTING Abnormal Cooling System
3176 DIESEL TRUCK ENGINE MECHANICAL TROUBLESHOOTING Loss Of Coolant
3176 DIESEL TRUCK ENGINE MECHANICAL TROUBLESHOOTING Engine Will Not Start
3176 DIESEL TRUCK ENGINE MECHANICAL TROUBLESHOOTING Fuel In Crankcase Oil