Articulating and Oscillating Hitch - Install
Installation Procedure
- Use a suitable lifting device in order to position articulating and oscillating hitch (3). The weight of articulating and oscillating hitch (3) is approximately 32 kg (71 lb).
Show/hide table
Illustration 1 | g01043381 |
Note: A typical example
- Position articulating and oscillating hitch (3) and install bolts (4) .
- Position steering cylinder (6) and install the bolt and pin (5) in articulating and oscillating hitch (3) .
- Remove suitable blocking (2) under the machine.
Show/hide table
Illustration 2 | g01085927 |
Note: A typical example
- Remove suitable blocking (1) from the front and the rear drums.
Caterpillar Information System:
CB14 Paving Compactor Machine Systems Articulating and Oscillating Hitch - Remove
770 and 772 Off-Highway Trucks Engine Supplement Engine Oil Filter Bypass Valve - Remove and Install
16M Motor Grader Engine Supplement Vibration Damper and Pulley - Remove and Install
120M and 12M Motor Graders Engine Supplement Rear Gear Group - Remove and Install
450E Backhoe Loader Machine Systems Swing Frame - Remove
770 and 772 Off-Highway Trucks Engine Supplement Electric Starting Motor - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Swing)(Pilot Operated)
16M Motor Grader Engine Supplement Turbocharger - Remove and Install
Improved Duo-Cone Seals Are Now Used on Articulated Trucks{4008, 7561} Improved Duo-Cone Seals Are Now Used on Articulated Trucks{4008, 7561}
450E Backhoe Loader Machine Systems Kickout and Positioner - Remove and Install
587R Pipelayer Engine Supplement Muffler - Remove and Install
3408C and 3412C Marine Engines Alternator and Regulator
770 and 772 Off-Highway Trucks Engine Supplement Engine Oil Cooler Bypass Valve - Remove and Install
16M Motor Grader Engine Supplement Engine Support (Front) - Remove and Install
16M Motor Grader Engine Supplement Engine Oil Filter Base - Remove
16M Motor Grader Engine Supplement Engine Oil Filter Base - Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Boom)(Pilot Operated)
770 and 772 Off-Highway Trucks Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Stabilizer) (Pilot Operated)
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering System Priority Valve (Steering)
CB14 Paving Compactor Machine Systems Steering Frame Lock - Separate and Connect
CB22, CB24, CB32 and CC24 Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
770 and 772 Off-Highway Trucks Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
2007/06/04 New Hubs in the Output Transfer Gear Are Now Used {3159}