Solenoid Valve and Manifold (Steering Disable) - Remove
Start By:
- Release the system hydraulic pressure. Refer to Disassembly and Assembly , "System Hydraulic Pressure - Release".
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the hydraulic tank (steering) into a suitable container for proper storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Tank (Steering) - Drain".
Show/hide table
Illustration 1 g01316055 Show/hide table
Illustration 2 g01316063 - Disconnect hose assembly (1). Disconnect fitting (2).
- Disconnect hose assemblies (4) and (5). Disconnect harness assembly (7). Disconnect tube assembly (8). Remove bolts (9). Remove the solenoid valve and manifold (6).
Caterpillar Information System:
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Speed Control - Test
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Speed/Timing - Test
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Sensor Signal (Analog, Passive) - Test
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Sensor Signal (Analog, Active) - Test
PL61 Pipelayer and D6K Track-Type Tractor Connector Locations
PL61 Pipelayer and D6K Track-Type Tractor General Information
770, 772, 773F and 777F Off-Highway Truck/Tractors and 775F Quarry Truck Monitoring System Service Menu
777D Off-Highway Truck Capacities (Refill)
PL61 Pipelayer and D6K Track-Type Tractor Hydraulic Fan System
Caterpillar Monitoring System Wiring Harness (Open Circuit) - Test
770, 772, 773F and 777F Off-Highway Truck/Tractors and 775F Quarry Truck Monitoring System Menu Navigation
777D Off-Highway Truck Truck Payload Measurement System (TPMS) - If Equipped
2007/09/24 The Steering Column Is Improved {4338}
C4.4 (Mech) Industrial Engine Piston Cooling Jet
248B and 268B Skid Steer Loaders Machine Systems High Flow Hydraulic System - Test and Adjust
777F Off-Highway Truck Machine Systems Solenoid Valve and Manifold (Steering Disable) - Install
2006/12/25 Improved Casting Improves Reliability {5804, 6508}
Procedure to Update the 797 and 797B Off-Highway Truck Center Arm Assembly{4305} Procedure to Update the 797 and 797B Off-Highway Truck Center Arm Assembly{4305}
777D Off-Highway Truck Air Dryer - Check
770 Off-Highway Truck and 772 Off-Highway Truck Assembly Procedure {7000, 7006, 7960} 770 Off-Highway Truck and 772 Off-Highway Truck Assembly Procedure {7000, 7006, 7960}
777D Off-Highway Truck Air Tank Moisture and Sediment - Drain
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Sensor Supply - Test
777D Off-Highway Truck Hoist Cylinder Bearings - Lubricate
777D Off-Highway Truck Hoist, Torque Converter and Brake Tank Oil - Change