Machine Frame and Mounting
Show/hide table
Illustration 1 | g01568514 |
(A) Orientation of the grease fitting ... 18 ± 1 degrees
(1) Apply the minimum three layers of 8T-9022 Silicone Gasket to two plates.
(2) Torque for seven bolts ... 40 ± 8 N·m (30 ± 6 lb ft)
(3) The maximum gap between the load stops must be less than 2.0 mm (0.08 inch). As required, use 287-4220 Shim in order to obtain the required gap. The maximum of three shims per side should be used:
- Thickness of one shim ... 2.0 mm (0.08 inch)
- If the gap is greater or equal to 2 mm (0.08 inch) and less than 4 mm (0.16 inch), add one shim.
- If the gap is greater or equal to 4 mm (0.16 inch) and less than 6 mm (0.24 inch), add two shims.
- If the gap is greater or equal to 6 mm (0.24 inch) and less than 8 mm (0.32 inch), add three shims.
Caterpillar Information System:
773F and 775F Off-Highway Trucks Machine Systems Steering Column - Install
773F and 775F Off-Highway Trucks Machine Systems Steering Column - Remove
773F and 775F Off-Highway Trucks Machine Systems Oil Filter (Parking, Service Brakes) - Remove and Install
770, 772, 773F and 777F Off-Highway Truck/Tractors and 775F Quarry Truck Monitoring System Switch Circuits
770 and 772 Off-Highway Truck Power Train Torque Converter and Transmission Pressure Chart
414E, 416E, 420E and 430E Backhoe Loaders MID 053 - CID 2403 - FMI 13
770 and 772 Off-Highway Truck Rollover Protective Structure (ROPS) - Inspect
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 0490 - FMI 03
777E, 777F and 777G Off-Highway Truck Engine Oil Cooler - Install
773F and 775F Off-Highway Trucks Machine Systems Solenoid Valve and Manifold (Steering Disable) - Install
770 and 772 Off-Highway Truck/Tractors Solenoid Valve and Manifold (Steering Disable) - Assemble
770 and 772 Off-Highway Truck/Tractors Solenoid Valve and Manifold (Steering Disable) - Disassemble
773F and 775F Off-Highway Trucks Machine Systems Steering Column - Disassemble
777E, 777F and 777G Off-Highway Truck Air Manifold (Inlet) - Remove and Install
773F and 775F Off-Highway Trucks Machine Systems Steering Column - Assemble
773F and 775F Off-Highway Trucks Machine Systems Slack Adjuster (Rear) - Remove
773F and 775F Off-Highway Trucks Machine Systems Slack Adjuster (Rear) - Install
770 and 772 Off-Highway Truck Hoist Cylinder Bearings - Lubricate
773F and 775F Off-Highway Trucks Machine Systems Brake Valve and Mounting (Parking) - Remove
773F and 775F Off-Highway Trucks Machine Systems Brake Valve and Mounting (Parking) - Install
770 and 772 Off-Highway Truck/Tractors Brake Valve and Mounting (Parking) - Disassemble
770 and 772 Off-Highway Truck/Tractors Brake Valve and Mounting (Parking) - Assemble
700 Family Articulated Trucks - Correction to Information for the Fuse Box{1417} 700 Family Articulated Trucks - Correction to Information for the Fuse Box{1417}
793D Off-Highway Truck Engine Supplement Muffler - Remove