Programmable Parameters
通过可编程参数可以配置发动机，以满足应用要求。 当安装应用程序时，系统配置参数必须编程。 在发动机首次起动前，进行编程。
需要气体分析数据和发动机性能数据，以确定点火正时和燃料控制的正确设置。 参数编程不正确可能导致发动机性能降低和/或发动机损坏。
可编程参数分为由其功能定义的组，其中可能包括发动机识别，正时控制，空/燃比控制，转速控制，起动/停止控制和发动机监视等组。
如果更换电子控制模块（ECM），必须从旧的 ECM 复制合适的参数。 这可使用 Cat® 电子技师 (ET) 的"复制配置"特性完成。 另外，也可以将设置记到纸上，然后再将其编程设定到新模块的配置屏幕上。
注: 在 ECM 更换步骤期间执行复制配置时，将会迁移损坏的 ECM 数据。 在由于存储器损坏而更换 ECM 的情况下，可能需要手动输入可编程参数，并重新标定特定部件。
Show/hide table
| 注意 |
|---|
|
发动机运转时修改参数可导致发动机运转不稳定。 这会造成发动机损坏。 只能在发动机停止时修改参数的设定值。 |
Caterpillar Information System:
AccuGrade® GPS Settings - Save - Save Settings Option
AccuGrade® GPS Settings - Restore - Restore Settings Option
AccuGrade® GPS Plan View - Set - Plan View Option
AccuGrade® GPS Maps
773D and 777D Off-Highway Truck/Tractors Caterpillar Monitoring System Tachometer Mode
773D and 777D Off-Highway Truck/Tractors Caterpillar Monitoring System Odometer Mode
AccuGrade® GPS Designs
773D and 777D Off-Highway Truck/Tractors Caterpillar Monitoring System General Information
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Brake and Planetary
793D Off-Highway Truck Engine Supplement Air Cleaner - Install
793D Off-Highway Truck Engine Supplement Air Cleaner - Remove
777E, 777F and 777G Off-Highway Truck Accumulator (Refrigerant) Remove and Install
G3600 Engines Symptom Troubleshooting
777E, 777F and 777G Off-Highway Truck Refrigerant Condenser - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 14 Amp and 15 Amp Alternators
Procedure to Install the Variable Speed Fan Drive on the 777F Off-Highway Truck{1359} Procedure to Install the Variable Speed Fan Drive on the 777F Off-Highway Truck{1359}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 40 Amp Alternator
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 55 Amp Alternator
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 65 Amp and 85 Amp Alternators
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Assemble
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Mounting and Dismounting
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove - Connecting rods in position
773D and 777D Off-Highway Truck/Tractors Caterpillar Monitoring System Service Mode