Metering Pump (Steering) - Remove and Install
拆卸步骤
开始:
- 拆下可调式转向柱。 请参阅拆解和组装, "可调节转向柱 - 拆卸和安装"。
Show/hide table
滚热的油或液压油的压力会对人员造成伤害。 发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。 卸下液压系统的部件或管路时,确保所有的作业机具都已降到地面上,而且液压油温度已冷。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修机器时,务必小心,确保用容器盛接流出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关可提供予卡特彼勒机器的工具及适合于盛装油液的容器,请参阅专门出版物, NENG2500, "卡特彼勒工具及车间用品指南"。 根据当地法规处置所有液体。 |
注: 为便于安装,在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和防止污染物进入系统。
- 将软管组件 (1) 从计量泵 (2) 上断开,然后拆下计量泵 (2) 。
Show/hide table
图 1 | g01269414 |
安装步骤
- 安装计量泵 (2) ,并将软管组件 (1) 连接到计量泵 (2) 。
Show/hide table
图 2 | g01269414 |
End By: 安装可调节转向柱。 请参阅 拆解和组装, "可调节转向柱 - 拆卸和安装"。
Caterpillar Information System:
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2167 - FMI 06
2015/02/05 New High Strength Bolts are Now Used for the Spiral Bevel Gears In Order To Improve Service Life in High Load Applications {3256, 3258}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2167 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2167 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2166 - FMI 13
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Adjustable Steering Column - Remove and Install
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2166 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2166 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2166 - FMI 03
2006/05/22 New Service Brake Accumulators for Cold Temperatures {4263}
2006/09/11 The Air Conditioning Lines Have Been Updated In Order to Eliminate Interference of the Hoses {1808, 5057}
C9 Marine Engines and C9 Marine Generator Sets Unit Injector Hydraulic Pump
Wireless Infrastructure Installation{733T, 7605} Wireless Infrastructure Installation{733T, 7605}
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pressure
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2167 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2168 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2168 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2168 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2168 - FMI 13
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
2006/05/15 New Crankshaft Front Seal {1160}
C4.4 Industrial Engine Fuel Injection Timing - Check
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2169 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2169 - FMI 05