Differential and Bevel Gear - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     |     | M16 × 6 in 导螺栓     | 2     |
B     | 138-7573     | 连杆支架     | 2     |
C     | 138-7574     | 连杆支架     | 2     |
D     | 8B-7551     | 拉拔器     | 1     |
E     | 5F-7343     | 拉拔器     | 1     |
F     | 4C-8348     | 扳手     | 1     |
G     | 4C-8349     | 扳手     | 1     |
开始:
- 拆下固定轴。 请参阅拆解和组装, "前固定轴 - 拆卸"。
- 卸下摆动轴。 请参阅拆解和组装, "摆动轴(后)- 拆卸"。
- 卸下停车制动器。 请参阅拆解和组装, "停车制动器 - 拆卸"。
- 拆下行车制动器。 请参阅拆解和组装, "行车制动器 - 拆卸"。
- 将适当的起重机和吊索连接在中间壳体 (1) 上。 拆下螺栓 (2) 和中间壳体组件 (1) 。 中间壳体 (1) 的重量约为 57 kg (125 lb)。
Show/hide table
图 1 | g00337019 |
- 卸下螺栓 (3) 和栓锁 (4) 。
注: 两个不同尺寸的调整螺母用于伞齿轮总成。 使用工具 (F) 或工具 (G) 拆下调整螺母。
Show/hide table
图 2 | g00337020 |
Show/hide table
图 3 | g00337021 |
- 使用工具 (F) 或工具 (G) 拆下调整螺母 (5) 。
- 从中间壳体 (1) 拆卸定位销 (7) 、套筒组件 (6) 和轴承外圈 (8) 。
- 拆下两个彼此相对的螺栓 (9) 。 将工具 (A) 安装到螺栓孔中。
Show/hide table
图 4 | g01207974 |
- 拆下剩余的螺栓 (9) 。 将小齿轮组件 (10) 从差速器壳体滑开以安装工具 (B) 。 将适当的起重机连接到小齿轮组件 (10) 上。
Show/hide table
图 5 | g01207972 |
- 利用起重机拆卸小齿轮组件 (10) 。 小齿轮组件的重量为 66 kg (145 lb)。
- 从小齿轮组件拆卸垫片和 O 形密封圈。
- 将工具 (C) 安装到差速器组件 (11) 上。 将适当的起吊设备连接到工具 (C) 上。 差速器组件的重量为 109 kg (240 lb)。
Show/hide table
图 6 | g01207977 |
- 拆下差速器组件 (11) 。
- 将差速器翻转到另一侧。
- 卸下螺栓 (14) 和栓锁 (15) 。
Show/hide table
图 7 | g00337026 |
典型示例 |
- 使用工具 (F) 或工具 (G) 拆下调整螺母 (16) 。
注: 两个不同尺寸的调整螺母用于伞齿轮总成。 使用工具 (F) 或工具 (G) 拆下调整螺母。
- 从差速器壳体 (20) 拆卸定位销 (17) 、套筒组件 (18) 和轴承外圈 (19) 。
- 利用工具 (D) 拆下轴承内圈 (21) 。
Show/hide table
图 8 | g00337027 |
- 将差速器翻转到另一侧。 利用工具 (E) 拆下轴承内圈 (22) 。
Show/hide table
图 9 | g00337028 |
- 拆下将伞齿轮 (25) 固定到位的 16 个螺栓 (24) 。 利用压具从差速器拆卸伞齿轮 (25) 。
- 将四个大弹簧销和四个小弹簧销 (23) 从伞齿轮上拆下。
Caterpillar Information System:
R1300G Series II Load Haul Dump Steering System Steering System (High Pressure Oil Circuit)
R1300G Series II Load Haul Dump Steering System Steering System (Pilot Oil)
777G Off-Highway Truck Frame and Body Support Pads - Clean/Inspect
777G Off-Highway Truck Frame and Body - Inspect
777F Off-Highway Truck Frame - Clean/Inspect
2005/10/03 Starting the Engine with Jumper Cables on Machines with an Electric Starter {1000, 7000}
IQAN MDL Control and Monitoring System Show Module Information
RM-500 Soil Stabilizer Operator Interlocks
3516B Off-Highway Trucks System Configuration Parameters
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner
793D Off-Highway Truck Steering System Solenoid Valve and Manifold (Rear Axle Fan, Lubrication, Steering) - Adjust
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Electrical Connectors - Inspect
R1600G Load Haul Dump Power Train Differential and Bevel Gear - Install
R2900G Load Haul Dump Steering System Pilot Valve (STIC Steering)
2005/10/10 A New Fitting is now Available for All Paving Products {0784, 6129}
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
320E and 323E Excavators Machine System Specifications Solenoid Valve (Quick Coupler)
416E Backhoe Loader Engine Starting with Starting Aid
777F Off-Highway Truck Transmission Tank Oil - Change
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System MID 116 - CID 0291 - FMI 03
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
RM-500 Soil Stabilizer Service Light Power Receptacle
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System MID 116 - CID 0291 - FMI 05
RM-500 Soil Stabilizer Load Controller