Improved Design for the Alternator Guard Assembly {7168}
- Excavator:
- 5130B (S/N: 4CS1-UP)
- Off-Highway Truck/Tractor:
- 776B (S/N: 6JC1-UP)
- Wheel Loader:
- 994 (S/N: 9YF1-UP)
- Track-Type Tractor:
- D11N (S/N: 4HK1-UP; 74Z1-UP; 4BB1-UP; 4CB1-UP; 8WH1-UP; 9MH1-UP; 9NH1-UP)
- Wheel Dozer:
- 854G (S/N: AMP1-UP; A4W1-UP; 1JW1-UP)
- 5230 (S/N: 7LL1-UP)
- 5230B (S/N: 4HZ1-UP)
- 5130 (S/N: 7TJ1-UP; 5ZL1-UP)
- 776C (S/N: 2TK1-UP)
- 777 (S/N: 84A1-UP)
- 777C (S/N: 4XJ1-UP)
- 777D HAA (S/N: AGY1-UP)
- 783B (S/N: 8YM1-UP)
- 784B (S/N: 5RK1-UP)
- 784C (S/N: 2PZ1-UP)
- 785 (S/N: 8GB1-UP)
- 785B (S/N: 6HK1-UP)
- 787B (S/N: 9TM1-UP)
- 789 (S/N: 9ZC1-UP)
- 789B (S/N: 7EK1-UP)
- 789C (S/N: 2BW1-UP)
- 793 (S/N: 3SJ1-UP)
- 793B (S/N: 1HL1-UP)
- 793D (S/N: FDB1-UP)
- 797 (S/N: 5YW1-UP)
- 797B (S/N: JSM1-UP)
- 776D (S/N: 5ER1-UP; AFS1-UP)
- 777D (S/N: AGC1-UP; 3PR1-UP; 2YW1-UP)
- 785C (S/N: 1HW1-UP; APX1-UP)
- 793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
- 994D (S/N: 3TZ1-UP)
- 994F (S/N: 4421-UP)
- 992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
- 994G (S/N: BEH1-UP; 8FR1-UP)
Description of Change: A new guard plate reduces the gap between the body of the alternator and the alternator guard assembly.
Adaptable To: The 268-5727 Plate As is used with the 160-9811 Alternator Guard Assembly in order to reduce the gap between the body of the alternator and the alternator guard assembly. The 268-5727 Plate As is adaptable to all of the Machines that are listed above.
Refer to Table 1 for the parts that are required to update the Machine Engines that use the 160-9811 Alternator Guard Assembly.
Show/hide table
Required Parts     | ||
Qty     | Part Number     | Description     |
1     | 268-5727     | Plate As     |
2     | 4H-8282     | Spacer     |
Show/hide table
Illustration 1 | g01166477 |
(1) 268-5727 Plate As (2) 160-9811 Alternator Guard Assembly |
Caterpillar Information System:
AP-800D and BG-230D Asphalt Pavers Engine Supplement Engine - Install
AP-800D and BG-230D Asphalt Pavers Engine Supplement Engine - Remove
AP-800D and BG-230D Asphalt Pavers Engine Supplement Radiator - Remove and Install
CP74B, CS74B, CP76B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Final Drive Planetary (Axle Propel) - Disassemble
AP-1055D and BG-2455D Asphalt Pavers Propel System Seal Leakage (Brake Piston) - Test
AP-1055D and BG-2455D Asphalt Pavers Propel System Piston Motor (Propel)
793D Off-Highway Truck Power Train Differential and Bevel Gear - Assemble
2006/01/23 A New Solenoid Valve for Ride Control Is Now Used {5264, 5479}
AP-1055D and BG-2455D Asphalt Pavers Propel System Piston Pump (Propel)
793D Off-Highway Truck Hoist and Brake Tank Oil Sample - Obtain
C15 and C18 Engines for Caterpillar Built Machines Compression Brake Lash - Adjust - If Equipped
AP-1055D and BG-2455D Asphalt Pavers Propel System Propel System
2005/05/30 Improved Design for the Alternator Guard Assembly {7168}
AP-1055D and BG-2455D Asphalt Pavers Propel System Final Drive Planetary
AP-1055D and BG-2455D Asphalt Pavers Propel System Parking Brake
AP-1055D and BG-2455D Asphalt Pavers Propel System Electrical Schematic (Propel System)
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Introduction
2005/05/23 Correction to Operation and Maintenance Manuals for the Paving Compactors {5653, 6605, 6606}
2005/05/23 New Source for Shaft Seal in Piston Pump (Steering) {4306, 5070}
TH220B, TH330B and TH340B Telehandlers Machine Systems Battery
587R Pipelayer Engine Valve Lash - Check
725 and 730 Articulated Trucks Machine Systems Brake Control Valve (Service) - Remove and Install
583T Pipelayer Ether Starting Aid Cylinder - Replace
AP-1055D and BG-2455D Asphalt Pavers Propel System Hydraulic Schematic (Propel System)