Radiator Group - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Brackets     | 2     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Attach a suitable lifting device to radiator group (21) by using tooling (A), as shown.
Show/hide table
Illustration 1 | g01016600 |
- Install radiator group (21). The approximate weight of the radiator group is 750 kg (1650 lb). Install bolts (22) for radiator group (21) .
Show/hide table
Illustration 2 | g01134391 |
- Connect hose assembly (20) that is located under the access plate.
Show/hide table
Illustration 3 | g01134387 |
- Install access plate (19) and install bolts (18) to the bottom of radiator and hydraulic oil cooler group.
Show/hide table
Illustration 4 | g01134386 |
- Connect hose assemblies (16) and (15) for the air conditioning to the condenser. Connect hose assemblies (16) and (15) to clips (17).
Show/hide table
Illustration 5 | g01134382 |
- Connect tube assembly (10) to the tank assembly for the coolant. Install hose assembly (11). Connect hoses (12) and (13). Connect hose (14) at the engine.
Show/hide table
Illustration 6 | g01134379 |
- Install upper fan guard (8) and lower fan guard (9). Install bolts (7) .
Show/hide table
Illustration 7 | g01016680 |
- Connect harness assembly (6) .
Show/hide table
Illustration 8 | g01134348 |
- Move dryer (5) into position. Secure dryer (5) with brackets (4) .
Show/hide table
Illustration 9 | g01134347 |
- Raise panel (2) into position. Install bolts (3) and install the clips (not shown) that hold the hose assembly for the air conditioner to the back of the panel.
Show/hide table
Illustration 10 | g01134286 |
- Install bolts (1).
Show/hide table
Illustration 11 | g01134276 |
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Capacities (Refill)".
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities (Refill)".
End By: Install the air cleaner. For additional information, refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
Caterpillar Information System:
3176C, 3196 and 3406E Engines for Caterpillar Built Machines E100 Low Engine Oil Pressure Warning
AP1055D and BG2455D Asphalt Pavers Engine Supplement Radiator, Air Cooler, and Hydraulic Oil Cooler - Remove
C7 Engines for Caterpillar Built Machines Fuel System - Prime
3176C, 3196 and 3406E Engines for Caterpillar Built Machines E053 Low Fuel Pressure Warning
735 and 740 Articulated Trucks Fuel System - Prime
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Stopping the Engine if an Electrical Malfunction Occurs
C7 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Motor (Hydraulic Generator) - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Rated Load
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Hydraulic Generator) - Install
TH580B Telehandler Hydraulic System Compensating System
735 and 740 Articulated Trucks Engine Oil Level - Check
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E14 - Fresh Air Sensor (Short Circuit)
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E15 - Water Temperature Sensor (Open Circuit)
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E16 - Water Temperature Sensor (Short Circuit)
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E21 - Evaporator Sensor (Open Circuit)
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E22 - Evaporator Sensor (Short Circuit)
312C, 322C, 325C and 330C Excavators and TK1051 Track Feller Buncher Air Conditioning and Heating Machine Preparation for Troubleshooting
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating General Troubleshooting Information
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Visual Inspection
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E43 - Damper (Air Outlet)
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E44 - Damper Error
R1300G Series II Load Haul Dump Engine Crankcase Breather - Clean
R2900G Load Haul Dump Steering System Steering System (Pilot Oil)