Radiator - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 138-7575 | 连杆支架 | 2 |
开始:
- 拆卸侧面板。 请参考拆解和组装, "侧面板 - 拆卸和安装"。
- 拆下风扇。 请参阅拆解和组装, "风扇 - 拆卸和安装"。
- 拆下发动机罩。 请参考拆解和装配, "发动机罩 - 拆卸和安装"。
- 将发动机冷却液排入合适的容器，以便保存或弃置。 请参阅操作和保养手册, "冷却系统冷却液（ELC）- 更换"。
- 拆下螺栓 (1) 和安装件 (2) 。 拆下格栅 (3) 。
Show/hide table
 | |
| 图 1 | g01239009 |
- 将螺栓 (5) 和支架 (6) 从散热器组件 (4) 的底部拆下。
Show/hide table
 | |
| 图 2 | g01114658 |
- 将工具 (A) 和适当的起吊设备安装到制冷剂冷凝器、液压油冷却器和变速箱油冷却器 (7) 上。 制冷剂冷凝器、液压油冷却器和变速箱油冷却器 (7) 的重量约为 55 kg (120 lb)。 将制冷剂冷凝器、液压油冷却器和变速箱油冷却器 (7) 置于机器前部，远离散热器组件 (4) 。
Show/hide table
 | |
| 图 3 | g01114669 |
- 拆下夹子 (10) 。 拆下支架 (9) 。
- 从制冷剂冷凝器、液压油冷却器和变速箱油冷却器上拆下适当的起吊设备。 将工具 (A) 重新定位到散热器组件 (4) 上。 将适当的起吊设备连接到工具 (A) 上。 散热器组件 (4) 的重量约为 36 kg (80 lb)。 拆下螺栓 (11) 。 拆下散热器组件 (4) 。
Show/hide table
 | |
| 图 4 | g01114670 |
Show/hide table
 | |
| 图 5 | g01240067 |
- 将散热器组件 (4) 放到适当的支座上。
Show/hide table
 | |
| 图 6 | g01114718 |
- 断开软管 (12) 。
Show/hide table
 | |
| 图 7 | g01114720 |
- 拆下卡箍 (13) 。
Show/hide table
 | |
| 图 8 | g01114722 |
- 拆下螺栓 (14) ，然后拆下膨胀箱 (15) 。
Show/hide table
 | |
| 图 9 | g01114724 |
- 拆下螺栓 (16) 和护罩 (17) 。
Show/hide table
 | |
| 图 10 | g01114727 |
Caterpillar Information System:
12M, 140M and 160M Motor Graders Hydraulic and Steering System Temperature Sensor (Hydraulic Oil)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Oil Filter (Return)
AP-1055D and BG-2455D Asphalt Pavers Access Doors and Covers
Procedure To Test Parallelism Of The Cutting Edge To The Mounting Plate Of The Bucket{6001, 6101, 6103, 6104, 6704} Procedure To Test Parallelism Of The Cutting Edge To The Mounting Plate Of The Bucket{6001, 6101, 6103, 6104, 6704}
24M Motor Grader Hydraulic and Steering System Check Valve (Hydraulic Oil Cooler Bypass)
2005/01/17 Use an Additional Body Retaining Pin To Install a New Truck Body on an Earlier Truck {7000, 7258}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Electric Starting Motor - Remove and Install
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Differential Pinion Bearing - Adjust
C27 and C32 Engines for Caterpillar Built Machines Gear Group (Rear)
2004/11/29 A New Solenoid Valve Group is Used for Ride Control {5004, 5479}
725 and 730 Articulated Trucks Fuel System Water Separator - Drain
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Automatic Blade Positioning System
267B, 277B and 287B Multi Terrain Loaders Machine Systems Solenoid Valve and Mounting (Parking Brake)
725 and 730 Articulated Trucks Hydraulic System Oil Level - Check
14M Motor Grader Kingpin Bearings - Lubricate
C27 and C32 Engines for Caterpillar Built Machines CID 1639 FMI 02 Machine Security System incorrect
C27 and C32 Engines for Caterpillar Built Machines CID 1639 FMI 09 Machine Security System Module not communicating on link
725 and 730 Articulated Trucks Torque Converter and Transmission Oil Level - Check
C15 and C18 Engines for Caterpillar Built Machines Fuel System
14M Motor Grader Fuel System Water Separator - Drain
CB-534D, CB-534D XW and CB-564D Vibratory Compactors Machine Systems Pump Drive - Remove and Install
14M Motor Grader Transmission and Differential Oil Level - Check
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Oscillating and Steering Bar
2004/10/25 A New Cab Improves Operator Comfort {7301}