C27 and C32 Tier 4 Engines Caterpillar


Engine Design

Usage:

C27 AT4

C32



Ilustrasi 1g01113721
(A) Katup saluran masuk
(B) Katup buang

Lubang ... 145 mm (5,7 in.)

Langkah ... 162 mm (6,4 in)

Kapasitas ... 32 L (1953 cu in)

Rasio kompresi ... 15:1

Susunan silinder ... 65 derajat V12

Katup per silinder ... 4

Jenis pembakaran ... Injeksi langsung

Pengukuran jarak celah katup

Saluran masuk ... 0,38 ± 0,08 mm (0,015 ± 0,003 in)

Saluran buang ... 0,76 ± 0,08 mm (0,030 ± 0,003 in)

Arah putaran crankshaft (dilihat dari ujung flywheel) ... Berlawanan arah putar jarum jam

Urutan pembakaran (urutan injeksi) ... 1, 10, 9, 6, 5, 12, 11, 4, 3, 8, 7, 2

Silinder no. 1 adalah silinder depan di sisi kiri blok silinder. Silinder no. 2 adalah silinder depan di sisi kanan blok silinder.

Catatan: Bagian depan engine terletak berlawanan dengan ujung flywheel engine. Sisi kiri engine dan sisi kanan engine dilihat dari ujung flywheel engine.

Caterpillar Information System:

267B, 277B and 287B Multi Terrain Loaders Machine Systems Pilot Operated Hydraulic Control
C11 and C13 Engines Flywheel Housing
725, 730 and 730 EJECTOR Articulated Trucks Power Train Interaxle Differential Troubleshooting
14M Motor Grader Cooling System Pressure Cap - Clean/Replace
14M Motor Grader Cooling System Coolant Extender (ELC) - Add
2004/11/08 Testing and Adjusting the High Flow XPS Auxiliary Hydraulic System Pressure {5050}
14M Motor Grader Specifications
725, 730 and 730 EJECTOR Articulated Trucks Power Train Transmission Planetary Troubleshooting
725, 730 and 730 EJECTOR Articulated Trucks Power Train Retarder Troubleshooting
725, 730 and 730 EJECTOR Articulated Trucks Power Train Torque Converter Troubleshooting
C15 and C18 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
2004/10/18 A New Panel Improves Accessibility Of Fuses And Relays {1417, 1420, 1422}
Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070}
AP-1055D and BG-2455D Asphalt Pavers Lifting and Tying Down the Machine
267B, 277B and 287B Multi Terrain Loaders Machine Systems General Information
416E, 420E and 430E Backhoe Loaders Power Train System Pressure - Release
583T Pipelayer Engine Supplement Prelubrication Oil Pump - Remove
12M, 140M and 160M Motor Graders Hydraulic and Steering System Visual Inspection
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Muffler - Remove and Install
16M Series 3 and 18M Series 3 Motor Graders Wheel Lean Bearings - Lubricate
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Piston Pump (Propel) - Disassemble
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Piston Pump (Propel) - Assemble
AP-1055D and BG-2455D Asphalt Pavers Daily Inspection
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.