Bottom Guard (Torque Converter) - Remove and Install
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Position a suitable jack under torque converter guard (1). The weight of torque converter guard (1) is approximately
42 kg (92.5 lb) . - Remove four bolts (2). Lower torque converter guard (1).
Show/hide table
Illustration 1 | g01072742 |
- Position a suitable jack under torque converter guard (1). The weight of torque converter guard (1) is approximately
42 kg (92.5 lb) . - Raise the jack and install four bolts (2).
Show/hide table
Illustration 2 | g01072742 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
CAES ULTRA Machine Control ; Guidance Products Computer Aided Earthmoving System Materials Windows
770 and 772 Off-Highway Truck Hoist and Brake Tank Oil Sample - Obtain
PF-300C and PS-300C Pneumatic Compactors Machine System Steering Pump Flow - Test
C11 and C13 Engines Fuel Filter Base
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Eccentric Weight
PF-300C and PS-300C Pneumatic Compactors Machine System Hydraulic Oil Contamination - Test
834H Wheel Dozer and 836H Landfill Compactor Power Train Relief Valve (Transmission Hydraulic Control)
Comfort Series Seat For Caterpillar Machines Comfort Seat Controls
12M Motor Grader Moldboard Wear Strip - Inspect/Adjust/Replace
16H Motor Grader Machine Systems Circle Drive - Assemble
143H and 163H Motor Graders Wheel Bearing Oil Level (Front) - Check - If Equipped
143H and 163H Motor Graders Wheel Bearing Oil (Front) - Change - If Equipped
AD45B Underground Articulated Truck Machine Systems Gear Pump (Secondary Steering) - Disassemble
AD45B Underground Articulated Truck Machine Systems Gear Pump (Secondary Steering) - Assemble
AD45B Underground Articulated Truck Power Train Relief Valve (Torque Converter Outlet) - Disassemble
AD45B Underground Articulated Truck Power Train Relief Valve (Torque Converter Outlet) - Assemble
R2900G Load Haul Dump Power Train Relief Valve (Torque Converter Outlet) - Remove
R2900G Load Haul Dump Power Train Relief Valve (Torque Converter Outlet) - Install
216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Work Tool Operation
8-16B and 10-20B Extend-A-Mat Screed Vibratory Group - Assemble
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Bucket Cylinder (Backhoe)
16H Motor Grader Machine Systems Circle Drive - Install
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Cycle Times - Test and Adjust
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter and Water Separator