Usage:
NOTE: The relief valve guide is a housing where spring (3) is located. Tighten relief valve guide to a torque of ... 40 ± 7 N·m (30 ± 5 lb ft)
(1) Front housing assembly.
(2) Oil pump cover assembly.
(3) 1W1788 Spring (pump pressure relief valve):
Length under test force ... 59.94 mm (2.360 in)
Test force ... 314 ± 14 N (70.6 ± 3.1 lb)
Free length after test ... 78.23 mm (3.080 in)
Outside diameter ... 22.23 mm (.875 in)
(4) Width of oil pump rotors (new) ... 36.474 ± 0.008 mm (1.4360 ± .0003 in)
Depth of counterbore in front housing (new) ... 36.576 ± 0.025 mm (1.4400 ± .0010 in)
(5) Maximum permissible end clearance of oil pump rotors when measured with oil pump installed to front cover ... 0.15 mm (.006 in)
View A-A Of Rotor Oil Pump
(6) Clearance of oil pump rotor tip when measured with oil pump installed to front cover ... 0.05 to 0.15 mm (.002 to .006 in)
View A-A Of Front Housing
(7) Bearing junction.
(8) Diameter of bearing for rotor (new) ... 71.224 ± 0.056 mm (2.8041 ± .0022 in)
(9) Position of main bearing junction from vertical centerline ... 75 ± 30 degrees