 |
|
Use of non approved work tools on Telehandler machines could result in injury or death. Before installing a work tool on this machine, ensure that it is approved by Caterpillar and that a Caterpillar load chart covering its use is installed in the machine's cab. |
| NOTICE |
|---|
|
When certain work tools are fitted, the work tools can contact the front tires or the front fenders. This situation can occur when the boom is retracted and the work tool is rotated fully forward. Always check for interference when first operating a new work tool. |
The work tools that are listed in these tables are approved by Caterpillar for use on the machines that are covered by this manual. The part number of the work tool is marked on the identification plate for the work tool. Use the following tables to determine that the work tool has been approved by Caterpillar. Additional work tools may have been approved since the publication of this manual. You must consult your Caterpillar dealer before using any work tool that is not in these tables. All work tools must be used in conjunction with the appropriate load chart. Use the following tables to ensure that you are using the correct load chart. You must know the load carrying capacity of these work tools. Make sure that you are using the correct load chart.
| TH580B | |
|---|---|
| Caterpillar Approved Work Tools(1) | |
| Part Number | Work Tool |
| 215-4350 | Fork Carriage Gp |
| 222-6210 | Fork Carriage Ar (Sideshift) |
| 174-7731 | Fork Carriage Gp (Wide) |
| 231-3229 | Rotating Carriage |
| 227-5748 | Rotating Carriage (Wide) |
| 252-1457 | Pallet Fork Gp (1220 mm Long) |
| 252-1458 | Pallet Fork Gp (1525 mm Long) |
| 252-1460 | Block Fork Gp (1220 mm Long) |
| 252-1459 | Pallet Fork Gp (Extended Shank) |
| 163-4261 | General Purpose Bucket Ar |
| 212-0731 | Platform Arrangement (Fixed) |
| 212-1299 | Platform Arrangement (Swivel) ( NACD) |
| 234-9518 | Platform Arrangement (Swivel) (EAME) |
| 229-9714(2) | Material Handling Arm Gp |
| 190-0913 | Hopper |
| 169-6460(3) | Lifting Hook Gp |
| 169-3945(4) | Truss Boom Gp |
| (1) | Observe the Local Regulations in certain regions, when you use Caterpillar approved work tools. |
| (2) | Changes in Local Regulations prohibit the use of this material handling arm gp in Australia and New Zealand. |
| (3) | Changes in Local Regulations prohibit the use of this lifting group in Australia and New Zealand. |
| (4) | Changes in Local Regulations prohibit the use of this boom extension in Australia and New Zealand. |