Illustration 1 | g01065645 |
There are several specific safety messages on your machine. The exact location of the hazard and description of the hazard are reviewed in this section. Take the time in order to become familiar with these safety messages.
You must be able to read all safety messages. Clean the safety messages in order to read the words. Clean the safety messages in order to see the pictures. Replace the safety messages in order to read the words. Replace the safety messages in order to see the pictures. To clean the safety messages, use a cloth, water and soap. Do not use solvent, gasoline, etc.
You must replace a safety message that is damaged or missing. You must replace a safety message that cannot be read. If a safety message is on a part that is replaced, install a new safety message on the part. See your dealer for new labels.
Do Not Operate (1)
This safety message is located inside the cover of the center screed control box if your screed is equipped with an electric heater.
g00934493 |
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death. |
No Open Fire (2)
This safety message is located inside the cover of the left screed control box.
g01067858 |
No open fire within15 m (50 ft) of the screed area while lighting the screed burners. Personal injury could result from the open fire. |