Track Drive - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 136-1452     | Retaining Ring Pliers As     | 1     |
B     | 1P-0510     | Driver Gp     | 1     |
- Use a suitable press and Tooling (B) in order to install bearing into flange (6) .
Note: Bearing (7) must be pressed into the flange in one direction.
Show/hide table
Illustration 1 | g01059738 |
- Use Tooling (A) in order to install retaining ring (8) .
Show/hide table
Illustration 2 | g01059734 |
- Use Tooling (B) in order to install seal (9) .
Show/hide table
Illustration 3 | g01059754 |
- Position the inner sleeves (3) and outer sleeves (4) onto sprocket (5) .
Show/hide table
Illustration 4 | g01059413 |
- Position rings (2) .
- Install bolts and nuts (1) .
End By: Install the track drive. Refer to Disassembly and Assembly, "Track Drive - Install".
Caterpillar Information System:
247B2 and 257B2 Multi Terrain Loaders Machine Systems Hydrostatic System - Flush and Fill
C15 and C18 Generator Set Engines Electronic Unit Injector - Remove
PS-150C Pneumatic Compactor Machine System Hydraulic Oil Filter
2006/01/02 Relocation of the Fuel Transfer Pump is Recommended for Certain Applications. {1256}
14H and 16H Motor Graders Hydraulic and Steering System Hydraulic and Steering System
216B, 226B, 232B and 242B Skid Steer Loaders Machine Systems Hydrostatic System - Test and Adjust
3406E, C-10, C-12, C-15, C-16 Truck Engines Product Storage
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
2004/03/22 Special Instruction, REHS1837 , "Bench Test Procedure for Bosch Rexroth A6VM HD Motors" Is Now Available {5058}
2004/03/22 Corrections to Special Instruction, REHS1738, "Installing the "B Series" Cab Door Kits" {7308}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Warning "Engine Oil Pressure Is Low" Is Displayed - Troubleshoot
PS-150C Pneumatic Compactor Propel System Hand Pump (Manual Brake Release)
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
AP-655C and BG-2255C Asphalt Pavers Machine Systems Steering Column - Remove
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Steering Column - Disassemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Steering Column - Assemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Steering Column - Install
770 and 772 Off-Highway Truck Engine Lockout Control
R1300G Load Haul Dump Remote Control System General Information
R1300G Load Haul Dump 3306 Engine Supplement Transmission Oil Cooler - Remove
R1600G Load Haul Dump Remote Control System System Schematic
2004/03/22 Special Instruction, REHS1799, "Installing the 233-5873 Installation Arrangement (AIR CONDITIONER, HEATER) (KIT)" Is Available {7304, 7320}
AP-655C and BG-2255C Asphalt Pavers Machine Systems Fuel Pump (Screed Burner) - Remove - CDG1-Up