267B, 277B and 287B Multi Terrain Loaders Power Train Caterpillar


Track Tensioner - Remove and Install - 267B and 277B Multi Terrain Loaders

Usage:

267B CYC

Removal Procedure

Start By:

  1. Remove the track. Refer to Disassembly and Assembly, "Track (Rubber) - Remove and Install".



    Illustration 1g01061624

  1. Attach a suitable lifting device to bogie assembly (1). Remove bogie assembly (1). The weight of the bogie assembly is approximately 29 kg (64 lb).



    Illustration 2g01061636

  1. Remove bolts (3) .

  1. Remove bogies (2) .

Installation Procedure




    Illustration 3g01061636

  1. Position bogies (2) .

  1. Install bolts (3) .



    Illustration 4g01061624

  1. Attach a suitable lifting device to bogie assembly (1). Position bogie assembly (1). The weight of the bogie assembly is approximately 29 kg (64 lb).

End By: Install the track. Refer to Disassembly and Assembly, "Track (Rubber) - Remove and Install".

Caterpillar Information System:

2004/03/22 A New Support Bracket is Used on the Air Conditioner Lines that Will Improve Service Life {1808}
216B, 226B, 232B and 242B Skid Steer Loaders Machine Systems Operational Checks
CB-334E and CB-335E Vibratory Compactors Machine Systems Additive Spray System Troubleshooting
2004/04/05 Special Instruction, REHS2101 , "Adjustment Procedure for The Governor Control" is Available {1265, 1276}
2005/03/21 Correction to Service Magazine , "A New Fuse Box Cover Is Now Used" {1417}
2004/06/21 Special Instruction, REHS2090 , "Planetary Troubleshooting Guide for the Asphalt Pavers" is Available {4050, 4084}
C13, C15, and C18 Generator Set Engines Event Codes
2004/04/12 Special Instruction, REHS2085 , "Installation Procedure for The Gas Spring on The Hood" is Available {7263}
PS-150C Pneumatic Compactor Machine System Water Spray Pump
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Communication Problem Between Controller and Monitor - Troubleshoot - "CID 248" and "CID 588"
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Connect
C13, C15, and C18 Generator Set Engines Low Power/Poor or No Response to Throttle
770 and 772 Off-Highway Truck Lifting and Tying Down the Machine
R2900G Load Haul Dump Machine Systems System Pressure - Release
AP-655C and BG-2255C Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge) - Disassemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge) - Assemble
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Transmission Oil Cooler
16H Motor Grader Engine Supplement Engine Enclosure (Hood) - Remove
2004/04/12 A New Demountable Rim Is Available for Applications with High Rimpull or Heavy Retarding {4209}
16H Motor Grader Engine Supplement Engine Enclosure (Hood) - Install
16H Motor Grader Engine Supplement Air Cleaner - Remove and Install
2004/07/01 A New Screen is Used in the 1L-2073 Pressure Reducing Valve {1462}
267B, 277B and 287B Multi Terrain Loaders Power Train Piston Motor (Hydrostatic) - Remove - 287B Multi Terrain Loader
PS-150B and PS-200B Paving Compactors Air Tank Moisture and Sediment - Drain
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.