Gear Motor (Hydraulic Fan) - Assemble
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
- Install seal (18) to motor (1) .
Show/hide table
Illustration 1 | g00908098 |
- Install retaining ring (17) to motor (1) .
- Install seal (16) to motor (1) .
- Install seals (14) and (15) to plate (13).
Show/hide table
Illustration 2 | g00907935 |
- Install plate (13) to motor (1) .
Show/hide table
Illustration 3 | g00907934 |
- Install driven gear (12) and drive gear (11) to motor (1) .
Show/hide table
Illustration 4 | g00907930 |
- Install plate (10) to motor (1) .
Show/hide table
Illustration 5 | g00907929 |
- Install O-ring seal (9) to motor (8) .
Show/hide table
Illustration 6 | g00907926 |
- Install body (8) to motor (1) .
Show/hide table
Illustration 7 | g00907924 |
- Install seals (7) and (6) to motor (1) .
Show/hide table
Illustration 8 | g00993376 |
- Install O-ring seal (5) to motor (1) .
- Install cover (4) to motor (1) .
Show/hide table
Illustration 9 | g00907333 |
- Install bolts (3) to motor (1) .
Show/hide table
Illustration 10 | g00907332 |
- Install nut (2) to motor (1) .
Show/hide table
Illustration 11 | g00912438 |
End By: Install the gear motor (Hydraulic fan). Refer to Disassembly and Assembly, "Gear Motor (Hydraulic Fan) - Install".
Caterpillar Information System:
120H and 135H Motor Graders Machine Systems Gear Motor (Hydraulic Fan) - Disassemble
CP-533E and CS-533E Vibratory Soil Compactors Propel System Drum Drive Group
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Lift Cylinder - Isolation and Drift Check
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Steering Cylinder Pressure - Test and Adjust
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Pilot System Pressure - Test and Adjust
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Piston Pump (Implement) High Pressure Cutoff - Test and Adjust
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Piston Pump (Implement) Standby Pressure - Test and Adjust
CP-533E and CS-533E Vibratory Soil Compactors Tire Inflation Pressure Adjustment
TH350B, TH355B, TH360B and TH460B Telehandlers Circuit Breakers - Test
CP-533E and CS-533E Vibratory Soil Compactors Propel System Axle
Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101} Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101}
584 and 584HD Forwarders Window Wiper - Inspect/Replace
924G and 924GZ Wheel Loaders Machine Systems Gear Motor (Hydraulic Fan) - Remove
120H and 135H Motor Graders Power Train Wheel and Tire (Rear) - Remove and Install
D3G, D4G and D5G HYSTAT Track-Type Tractors Electrohydraulic Power Train Systems Configuration Parameters
CP-533E and CS-533E Vibratory Soil Compactors Propel System Piston Motor (Drum Propel)
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Pump
R1300G Load Haul Dump Power Train Electronic Control System Autoshift Control
R1300G Load Haul Dump Power Train Electronic Control System Electronic Control Module (Power Train)
R1300G Load Haul Dump Power Train Electronic Control System Switches
120H and 135H Motor Graders Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
120H and 135H Motor Graders Machine Systems Piston Pump (Hydraulic Fan) - Assemble
924G and 924GZ Wheel Loaders Machine Systems Gear Motor (Hydraulic Fan) - Install
CB-434D and CB-434D XW Vibratory Asphalt Compactor Machine Systems Seat Belt