CB-534D and CB-564D Asphalt Compactors Caterpillar


Walk-Around Inspection

Usage:

CB-534D B5M

------ WARNING! ------

柴油发动机的排气含有可伤害人体的燃烧产物。

必须要在通风良好的地方起动发动机,如果在密闭的地方起动,就要把排气通到外面。


为了延长机器使用寿命,在登上机器和起动发动机之前,应绕行机器进行彻底的检查。



图 1g00916213

提起转向架的锁定销。 把锁定销放在开锁位置上。 为使机器转向,转向架锁定销必须要处在开锁位置上。

检查机器四周和机器下面。 特别注意是否有堆积的废物、松动的螺栓、脏物、油液泄漏、冷却液泄漏、零件破损或零件磨损。

检查液压部件的状况。

检查油面、冷却液液面和燃油油面。

清除所有堆积的废物及碎屑。 在操作机器前,请先进行所有必要的修理。

检查油水分离器中是否有水。

有关围绕机器检查的详细资料,请参看操作和保养手册, "围绕机器检查"-保养章节。

Caterpillar Information System:

R1600G Load Haul Dump Tire Shipping Pressure
574B Forwarder Tire Chains - Install
584 and 584HD Forwarders Tire Tracks - Install
8-16B Extend-A-Mat Screed Maintenance Interval Schedule
IQAN® Monitoring ; Control System Copy Settings from Another Mode
24H Motor Grader Automatic Lubrication System Lubrication System
IQAN® Monitoring ; Control System Select Mode
AP-655C and BG-2255C Asphalt Pavers Machine Systems Hydraulic Filter (Vibratory)
2002/12/02 The Contents Of The Service Manuals For All Caterpillar Machines Is Available On The Caterpillar Intranet {1000}
Topcon® System Five Reference Material
R1600G Load Haul Dump Lift Arm Positioner
IQAN® Monitoring ; Control System Operational Position
R1600 Load Haul Dump Lubricant Viscosities
AP-655C and BG-2255C Asphalt Pavers Propel System Cooler Bypass Valve
R1600G Load Haul Dump Capacities (Refill)
IQAN® Monitoring ; Control System Reset Mode
R1600G Load Haul Dump Filter and Screen Locations
R2900G Load Haul Dump Capacities (Refill)
3126B Marine Engines E190 Engine Overspeed Warning
R2900G Load Haul Dump Parking Brake Manual Release
R1300G Load Haul Dump Braking System Pressure Switch (Parking Brake Oil)
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control System" {5077}
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Circuit (If Equipped)" {5077}
2002/12/23 Correction to Operator's Station and Electrical System "Ride Control Circuit (If Equipped)" {7332}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.