2002/10/21 Caterpillar


A Special Instruction, REHS1252, "Field Installation of Body Exhaust Arrangements" Is Available {1061, 7258}

Usage:

D400E 2YR
Articulated Truck:
D350E (S/N: 9LR1-UP)
D400E (S/N: 2YR1-UP)

A Special Instruction, REHS1252, "Field Installation of Body Exhaust Arrangements" is available.

This instruction describes the procedure to install exhaust body arrangements on the D350E and D400E Articulated Trucks.

The Special Instruction, REHS1252, "Field Installation of Body Exhaust Arrangements" can be obtained through the normal literature ordering channels. This special instruction can also be found on the Caterpillar Service Information System (SIS).

Caterpillar Information System:

2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070} Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
14H Motor Grader Machine Systems Wheel Lean Bar - Remove and Install
Test Sequence for Capsule Type Fuel Nozzles{0782} Test Sequence for Capsule Type Fuel Nozzles{0782}
14H Motor Grader Machine Systems Blade Lift Cylinder - Remove and Install
CB-634D Paving Compactor Machine Electronic Control System Service Tools
574B Forwarder Power Train On/Off Switches
TH210 and TH215 Telehandlers Power Train Parking Brake Control - Remove and Install
D350E and D400E Articulated Trucks Power Train Solenoid Valve (Lockup Clutch)
D350E and D400E Articulated Trucks Power Train Lockup Clutch and Solenoid Valve
574B Forwarder Power Train Accelerator Pedal
14H Motor Grader Machine Systems Combination Valve - Remove
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Pump Control (Output Flow) - Adjust
14H Motor Grader Machine Systems Bank Valve - Remove
14H Motor Grader Machine Systems Bank Valve - Install
14H and 16H Motor Graders Hydraulic and Steering System Hydraulic Schematic
2002/10/28 Examine Failed Starting Motors to Understand the Reason for Failure {1453}
AP-655C and BG-2255C Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Test/Enable Switch
574B Forwarder Power Train Introduction
C15 Petroleum Generator Set Engines Electric Starting Motor
3126B Machine Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Piston Pump Flow - Test - Upper and Lower Pump Stacks
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.