REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER Caterpillar


REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER

Usage:

REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER

CONFIDENTIAL TIBU4501-00

TECHNICAL INFORMATION BULLETIN

APRIL 6, 2005

INDUSTRIAL ENGINE

 

 

MACHINE ENGINE

MARINE ENGINE

ON-HIGHWAY TRUCK ENGINE

C15 (JRE00100-UP)

C-15 (BEM01854-UP)

C-16 (BFM00576-UP)

C18 (WJH00101-UP)

C15 (LHX01251-UP)

C18 (RHX00987-UP)

C18 (C1J00180-UP, CKH00219-UP, CYN00150-UP)

3406E (2WS00001-UP)

C15 (BXS00028-UP, MXS00300-UP)

C-15 (6NZ02440-UP, MBN04660-UP)

C-16 (7CZ02563-UP)

C-18 (MDP00147-UP)

 

Component Code(s) 1151

SUBJECT: REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER

PROBLEM:

There have been reports of nuts loosening on the front engine cover of the above listed engines.

SOLUTION:

A replacement hold down nut is available if loose holds down nuts on the studs for the front cover are found. The two 5S-0003 Nuts can be replacement with two 031-4155 Locknuts.

 

COPYRIGHT 2005 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

G3600 ICSM Software Update for Exhaust Port Temperature Diagnostics G3600 ICSM Software Update for Exhaust Port Temperature Diagnostics
Product Link PL-300 ECM (Control Gp. P/N 239-9954) Product Link PL-300 ECM (Control Gp. P/N 239-9954)
Potential Problems with Larne and Griffin Gensets Potential Problems with Larne and Griffin Gensets
New ECM Hardware and Software for G3600A+ Engine. New ECM Hardware and Software for G3600A+ Engine.
231-12 (J1939 Device Not Responding) Diagnostic Code is Logged Every Time the Key Switch is Turned On. 231-12 (J1939 Device Not Responding) Diagnostic Code is Logged Every Time the Key Switch is Turned On.
OIL CARRY OVER/OIL FILL QUANTITIES FOR THE C7 ON-HIGHWAY ENGINE OIL CARRY OVER/OIL FILL QUANTITIES FOR THE C7 ON-HIGHWAY ENGINE
Eaton Top 2 and Ultrashift Transmission Problems Eaton Top 2 and Ultrashift Transmission Problems
New PC Service Tool Software Released for Cellular Based Product Link (PL102C) New PC Service Tool Software Released for Cellular Based Product Link (PL102C)
Fault Code 94-03 Fuel Pressure Voltage High Present After Updating the C7 Engine Control Module and the C9 Engine Control Module (ECM) with October or Later Flash Files Fault Code 94-03 Fuel Pressure Voltage High Present After Updating the C7 Engine Control Module and the C9 Engine Control Module (ECM) with October or Later Flash Files
221-1018 Engine ECM Problems 221-1018 Engine ECM Problems
The �Droop (%)� parameter cannot be set using the ET Service Tool as stated in the 3500B Series II Marine Gen Set Engines Troubleshooting Guide (RENR5004). The �Droop (%)� parameter cannot be set using the ET Service Tool as stated in the 3500B Series II Marine Gen Set Engines Troubleshooting Guide (RENR5004).
3500 A3 (Series 2) Marine Propulsion Software Does Not Perform The Injector Solenoid Test Properly 3500 A3 (Series 2) Marine Propulsion Software Does Not Perform The Injector Solenoid Test Properly
Blocked Oil Passages on the 3408, 3408C, G3408, 3412, 3412C, and G3412 Industrial and Commercial Engines Blocked Oil Passages on the 3408, 3408C, G3408, 3412, 3412C, and G3412 Industrial and Commercial Engines
Product Link Ready Machines � Potential Wiring Error Product Link Ready Machines � Potential Wiring Error
Circuit Breaker Interrupting Rating on Griffin and Lafayette-Packaged Engine Generator Sets Circuit Breaker Interrupting Rating on Griffin and Lafayette-Packaged Engine Generator Sets
Converting Bucket Base Edges From J-Series Adapters To K-Series Adapters On Certain Excavators Converting Bucket Base Edges From J-Series Adapters To K-Series Adapters On Certain Excavators
Information on the Lifting Capacities for Material Handling Arm Groups for the Skid Steer Loaders, Multi-Terrain Loaders, Backhoe Loaders, Integrated Toolcarriers and Telehandlers Information on the Lifting Capacities for Material Handling Arm Groups for the Skid Steer Loaders, Multi-Terrain Loaders, Backhoe Loaders, Integrated Toolcarriers and Telehandlers
New Tooling Helps to Reduce the Amount of Vented Refrigerant on all Cat Machines New Tooling Helps to Reduce the Amount of Vented Refrigerant on all Cat Machines
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
New Control Panel Hinge Available for Larne and Griffin Packaged 3406, 3456, and C18 Common Design Generator Sets New Control Panel Hinge Available for Larne and Griffin Packaged 3406, 3456, and C18 Common Design Generator Sets
Oil Filter Leaking on the C15 On-Highway Engines Oil Filter Leaking on the C15 On-Highway Engines
Product Link � Software Part Number to CPLS/EM Version Number Conversion Table Product Link � Software Part Number to CPLS/EM Version Number Conversion Table
590 to 599 Frame Generator Flex Plate Bolts Susceptible to Breaking 590 to 599 Frame Generator Flex Plate Bolts Susceptible to Breaking
IDLE REDUCTION ON MASS TRANSIT BUS ENGINES IDLE REDUCTION ON MASS TRANSIT BUS ENGINES
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.