490 Generator Frame Bearing Failure Caterpillar


490 Generator Frame Bearing Failure

Usage:

490 Generator Frame Bearing Failure

CONFIDENTIAL TIBU4170-00

TECHNICAL INFORMATION BULLETIN

February 18, 2004

Generator Set

3406E(8AZ)

3456 (CAH)

 

Component Code(s) 4471

SUBJECT: 490 Generator Frame Bearing Failure

PROBLEM:

There may be premature failure of the main generator bearing on the 490 frame generators. The bearing collapses due to the lack of lubricant. OMM incorrectly states that no lubricant is required for this generator.

SOLUTION:

The correction to the OMM has now been approved. The paragraph with the incorrect information stating that no lubrication is required on the 3406E generator sets has been removed.

The 3456 generator set prefix has been included in this issue to remove the possibility of further confusion. The 3456 uses the same generator as the 3406E (490 frame SR4B).

This issue is a generator specific problem and is not engine model related.

 

COPYRIGHT 2004 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

Idler Gear Hub Failures on 3054C, 3054E, and 3056E Engines Idler Gear Hub Failures on 3054C, 3054E, and 3056E Engines
Application of Thermally Conductive 4C-6715 Rectifier Silicone Kit when Installing 9Y-0916 Rectifier Assembly Application of Thermally Conductive 4C-6715 Rectifier Silicone Kit when Installing 9Y-0916 Rectifier Assembly
Troubleshooting and Repair of Vacuum Leaks Troubleshooting and Repair of Vacuum Leaks
Rotor Position Sensor (RPS) Upgrade Rotor Position Sensor (RPS) Upgrade
Static Drain Assembly Kit Installation and Adjustment. Static Drain Assembly Kit Installation and Adjustment.
Update on Calibration of Hall Probes when EVD Style Flywheel Bearings are utilized Update on Calibration of Hall Probes when EVD Style Flywheel Bearings are utilized
Hall Probe Sensor to Load Cell Sensor Conversion Upgrade on Uninterruptible Power Supply Hall Probe Sensor to Load Cell Sensor Conversion Upgrade on Uninterruptible Power Supply
Circuit Breaker Set Points for SMS and MMS Configurations Circuit Breaker Set Points for SMS and MMS Configurations
RADIATOR INFORMATION NEEDED FOR 3412C ENGIINES RADIATOR INFORMATION NEEDED FOR 3412C ENGIINES
Engines Assembled with Incorrect Plugs on the Engine Oil Filter Base Engines Assembled with Incorrect Plugs on the Engine Oil Filter Base
Oil Carryover from the Side-Mounted Breather Oil Carryover from the Side-Mounted Breather
Flash Files are Released for the 3126B Engines and 3126E EngineE Flash Files are Released for the 3126B Engines and 3126E EngineE
Failed Sensors May Cause Hard Starting and Misfiring in 3406E and 3456 Engines Failed Sensors May Cause Hard Starting and Misfiring in 3406E and 3456 Engines
Faulty Fuel Priming Pumps on Various Engines Faulty Fuel Priming Pumps on Various Engines
3126B AND 3126E ENGINES HARD STARTING IN COLD CONDITIONS 3126B AND 3126E ENGINES HARD STARTING IN COLD CONDITIONS
C7 On-highway Truck Engine Stumble/misfire On Acceleration C7 On-highway Truck Engine Stumble/misfire On Acceleration
Drain Back Holes Must Be Drilled In 238-2703 Pistons When Used In Lightly Loaded Marine Auxiliary Engines Drain Back Holes Must Be Drilled In 238-2703 Pistons When Used In Lightly Loaded Marine Auxiliary Engines
K-Series 220-9090 Drive Through Retainer Movement K-Series 220-9090 Drive Through Retainer Movement
Pre-delivery Inspection Service Letter Pre-delivery Inspection Service Letter
Valve Bonnets with Insufficient Hardness Valve Bonnets with Insufficient Hardness
3406E Marine Software 3406E Marine Software
C11/C13 Air Compressor Piston Seizure C11/C13 Air Compressor Piston Seizure
Certain Keel Cooled C18 Marine Engines May Leak Coolant Certain Keel Cooled C18 Marine Engines May Leak Coolant
232-9737 Software Issues with MSS Standalone Time/Date Functions 232-9737 Software Issues with MSS Standalone Time/Date Functions
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.