Idler Gear Hub Failures on 3054C, 3054E, and 3056E Engines Caterpillar


Idler Gear Hub Failures on 3054C, 3054E, and 3056E Engines

Usage:

Idler Gear Hub Failures on 3054C, 3054E, and 3056E Engines

CONFIDENTIAL TIBU4161-02

TECHNICAL INFORMATION BULLETIN

July 14, 2004

Caterpillar Products

3054C (3341-Up)

3054E (3041-Up)

3056E (3561-Up)

315C (ANF1-Up)

924G (DDA1-Up),(DFZ1-Up),

(RBB1-Up),(RTA1-Up),

(WGX1-Up),(WMB1-Up)

928G (DJD1-Up),(WAC1-Up),

(WLG1-Up)

AP-655C (CDG1-Up)

CB-434D (CNH1-Up)

CB-534D (EAA1-Up),(FGH1-Up)

CP-433E (ASN1-Up)

CP-563E (BWE1-Up),(CNT1-Up)

CP-573E (ASY1-Up),(ASZ1-Up)

CP-663E (ASF1-Up),(DAF1-Up)

CS-423E (AST1-Up)

CS-433E (ASR1-Up)

CS-533E (DAK1-Up)

CS-563E (ASA1-Up),(CNG1-Up)

CS-573E (CEB1-Up),(CNN1-Up)

CS-583E (CNX1-Up),(DAJ1-Up)

CS-663E (ASB1-Up),(DAG1-Up)

CS-683E (ASG1-Up),(DAD1-Up)

IT28G (DBT1-Up),(EWF1-Up)

M313C (BDR1-Up)

M315C (BDM1-Up)

M316C (BDX1-Up)

M318C (BCZ1-Up),(BEB1-Up)

M322C (BDK1-Up),(BDY1-Up)

TH220B (SLA1-Up)

TH330B (SLB1-Up)

TH340B (SLC1-Up)

TH460B (SLF1-Up)

TH560B (SLG1-Up)

 

Component Code 1206

SUBJECT: Idler Gear Hub Failures on 3054C, 3054E, and 3056E Engines

PROBLEM:

Excessive wear on the idler gear hub and on the idler gear bushing has been reported.

SOLUTION:

An interim containment for this problem is available. If the bushing in the 232-3668 or the 216-8633 Idler Gear Assembly (1) and the 067-6897 Idler Gear Hub (2) exhibit excessive wear , replace the worn parts with the following newly introduced parts:

The new 251-4336 Idler Gear Assembly contains a new solid brush and the 254-6029 hub material has also changed. A new retaining plate that has longer screws is also included.

Early identification of wear of the idler hub and bushing is possible through Scheduled Oil Sampling (S× O× S). If the level of copper (Cu) exceeds 100 ppm in any 250-hour period, further investigation should be carried out. Other symptoms of the wear problem may include hard starting and white smoke.

Note: The following table lists the commercial and machine engine serial numbers that are affected by this change.

Engine Sales Model

Engine Type

Affected S/N

3054C

Commercial

33400382-01603

3054C

Machine

CRS00322-02033

3054E

Commercial

3041-Up

3054E

Machine

CRX00330-01741

3056E

Commercial

35600199-00634

3056E

Machine

CPT02266-06884

 

COPYRIGHT 2004 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

Application of Thermally Conductive 4C-6715 Rectifier Silicone Kit when Installing 9Y-0916 Rectifier Assembly Application of Thermally Conductive 4C-6715 Rectifier Silicone Kit when Installing 9Y-0916 Rectifier Assembly
Troubleshooting and Repair of Vacuum Leaks Troubleshooting and Repair of Vacuum Leaks
Rotor Position Sensor (RPS) Upgrade Rotor Position Sensor (RPS) Upgrade
Static Drain Assembly Kit Installation and Adjustment. Static Drain Assembly Kit Installation and Adjustment.
Update on Calibration of Hall Probes when EVD Style Flywheel Bearings are utilized Update on Calibration of Hall Probes when EVD Style Flywheel Bearings are utilized
Hall Probe Sensor to Load Cell Sensor Conversion Upgrade on Uninterruptible Power Supply Hall Probe Sensor to Load Cell Sensor Conversion Upgrade on Uninterruptible Power Supply
Circuit Breaker Set Points for SMS and MMS Configurations Circuit Breaker Set Points for SMS and MMS Configurations
RADIATOR INFORMATION NEEDED FOR 3412C ENGIINES RADIATOR INFORMATION NEEDED FOR 3412C ENGIINES
Engines Assembled with Incorrect Plugs on the Engine Oil Filter Base Engines Assembled with Incorrect Plugs on the Engine Oil Filter Base
Oil Carryover from the Side-Mounted Breather Oil Carryover from the Side-Mounted Breather
Flash Files are Released for the 3126B Engines and 3126E EngineE Flash Files are Released for the 3126B Engines and 3126E EngineE
Replace Failed 3054E and 3056E Fuel Injection Pumps with New Pumps from Cat Parts Replace Failed 3054E and 3056E Fuel Injection Pumps with New Pumps from Cat Parts
490 Generator Frame Bearing Failure 490 Generator Frame Bearing Failure
Failed Sensors May Cause Hard Starting and Misfiring in 3406E and 3456 Engines Failed Sensors May Cause Hard Starting and Misfiring in 3406E and 3456 Engines
Faulty Fuel Priming Pumps on Various Engines Faulty Fuel Priming Pumps on Various Engines
3126B AND 3126E ENGINES HARD STARTING IN COLD CONDITIONS 3126B AND 3126E ENGINES HARD STARTING IN COLD CONDITIONS
C7 On-highway Truck Engine Stumble/misfire On Acceleration C7 On-highway Truck Engine Stumble/misfire On Acceleration
Drain Back Holes Must Be Drilled In 238-2703 Pistons When Used In Lightly Loaded Marine Auxiliary Engines Drain Back Holes Must Be Drilled In 238-2703 Pistons When Used In Lightly Loaded Marine Auxiliary Engines
K-Series 220-9090 Drive Through Retainer Movement K-Series 220-9090 Drive Through Retainer Movement
Pre-delivery Inspection Service Letter Pre-delivery Inspection Service Letter
Valve Bonnets with Insufficient Hardness Valve Bonnets with Insufficient Hardness
3406E Marine Software 3406E Marine Software
C11/C13 Air Compressor Piston Seizure C11/C13 Air Compressor Piston Seizure
Certain Keel Cooled C18 Marine Engines May Leak Coolant Certain Keel Cooled C18 Marine Engines May Leak Coolant
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.