Incorrect Engine Arrangement Numbers Shown On Customer Invoices
Usage:
TELEHANDLERSCOSA TH62 (4TM1745-2077),
TH63 (5WM2762-3265),
TH82 (3JN695-744),
TH83 (3RN1910-2169),
TH103 (3PN472-1063),
NACD TH62 (4TM1130-2077),
TH63 (5WM1399-3265),
TH82 (3JN556-744),
TH83 (3RN935-2169),
TH103 (3PN472-1063) TELEHANDLERS
TH63 (5WM2762-3265),
TH82 (3JN695-744),
TH83 (3RN1910-2169),
TH103 (3PN472-1063),
NACD TH62 (4TM1130-2077),
TH63 (5WM1399-3265),
TH82 (3JN556-744),
TH83 (3RN935-2169),
TH103 (3PN472-1063) TELEHANDLERS
Problem:
Incorrect engine arrangement numbers have been entered on customer invoices for machines with serial numbers in the above ranges. Dealers who have logged this information into machine history files will have recorded incorrect information.
Solution:
Please correct any records of machines where this information has been logged. Replace the old engine arrangement number 118-2942 with the new emissions engine arrangement number 130-6342.
COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Oil In Turbochargers Oil In Turbochargers
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Grade Control Valve Contamination Grade Control Valve Contamination
Oil Pan Cracking Oil Pan Cracking
Use 1R-1297 Belts With Special Application Drive Wheels Use 1R-1297 Belts With Special Application Drive Wheels
Ground Speed Calibration Factor May Have Not Been Entered At The Factory Ground Speed Calibration Factor May Have Not Been Entered At The Factory
Procedure To Stop Oil Leaks From Around Engine Breather Cover Procedure To Stop Oil Leaks From Around Engine Breather Cover
Steering Effort May Increase Steering Effort May Increase
108-5933 Ride Control Accumulator 108-5933 Ride Control Accumulator
Machines That Are Equipped With 136-4652 Cleaner Bar Group Have Experienced Finger Loosening Machines That Are Equipped With 136-4652 Cleaner Bar Group Have Experienced Finger Loosening
Incorrect Seal Installation On The Hydrostatic Drive Causes Leaks Incorrect Seal Installation On The Hydrostatic Drive Causes Leaks
Machines Experiencing Brake Overheating Due To Repetitive Braking At High Speed Machines Experiencing Brake Overheating Due To Repetitive Braking At High Speed
Serial Information Number (SIN) Decal Replacement Serial Information Number (SIN) Decal Replacement
9X-4606 Lip Seal May Leak At Torque Converter Output Shaft And Transfer Gear Input 9X-4606 Lip Seal May Leak At Torque Converter Output Shaft And Transfer Gear Input
Hood May Contact Aftercooler Hood May Contact Aftercooler
Certain 145-6035 Duo-Cone Seal Groups Need To Be Inspected And Removed From Dealer Inventory Certain 145-6035 Duo-Cone Seal Groups Need To Be Inspected And Removed From Dealer Inventory
Torque Converter Turbine Rubbing And Wear Torque Converter Turbine Rubbing And Wear
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Incorrect Muffler Extensions May Have Been Shipped With Machines Incorrect Muffler Extensions May Have Been Shipped With Machines
Noise From The Steering System Noise From The Steering System
Test Procedure For Electrical Components Of Air Conditioning System Test Procedure For Electrical Components Of Air Conditioning System
Clarification Of Service Letter PI3136 Clarification Of Service Letter PI3136
Remanufactured Water Pump For 3500 Engine Remanufactured Water Pump For 3500 Engine
Lock Valve Leaking Causing Implement Drift Or Undesired Machine Lock Valve Leaking Causing Implement Drift Or Undesired Machine