Machines That Are Equipped With 136-4652 Cleaner Bar Group Have Experienced Finger Loosening
Usage:
WHEEL LOADERS826G (7LN1-465) LANDFILL COMPACTORS
Problem:
Reports that the 7I-3968 Bar is loosening have been received. The loosening may be caused by insufficient bolt stretch, improper torque, or the incorrect positioning of the bar.
Solution:
The following procedure should be used to position and tighten the bars.
- 2. Apply 4C-9507 Thread Lock to the bolt threads just prior to installation.
- 3. Adjust the bar so that the gap between the bar and the wheel equals the dimensions that are listed in Detail A, Detail B, and Detail C.
- 4. Torque bolts (1) to 900 ± 100 N·m (660 ± 75 lb ft).
COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Incorrect Seal Installation On The Hydrostatic Drive Causes Leaks Incorrect Seal Installation On The Hydrostatic Drive Causes Leaks
Machines Experiencing Brake Overheating Due To Repetitive Braking At High Speed Machines Experiencing Brake Overheating Due To Repetitive Braking At High Speed
Improperly Torqued Hardware On Driveshaft Yokes Improperly Torqued Hardware On Driveshaft Yokes
Compactors May Seem Underpowered When Used In Certain Applications Compactors May Seem Underpowered When Used In Certain Applications
Some 163-1877 (Windshield) Washer Groups Have Been Assembled Incorrectly Some 163-1877 (Windshield) Washer Groups Have Been Assembled Incorrectly
Incorrect Service Literature Incorrect Service Literature
Generator Lead Connections Can Rub Against The Terminal Box Or Each Other Generator Lead Connections Can Rub Against The Terminal Box Or Each Other
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
Oil Transfer Will Dilute Transmission Oil Oil Transfer Will Dilute Transmission Oil
Engine Oil Filler Cap Loosens Engine Oil Filler Cap Loosens
Certain Pavers May Turn Slightly When Starting And Stopping Certain Pavers May Turn Slightly When Starting And Stopping
Bolts On Tension Cylinder Mounting Bracket May Not Have Adequate Torque Bolts On Tension Cylinder Mounting Bracket May Not Have Adequate Torque
108-5933 Ride Control Accumulator 108-5933 Ride Control Accumulator
Steering Effort May Increase Steering Effort May Increase
Procedure To Stop Oil Leaks From Around Engine Breather Cover Procedure To Stop Oil Leaks From Around Engine Breather Cover
Ground Speed Calibration Factor May Have Not Been Entered At The Factory Ground Speed Calibration Factor May Have Not Been Entered At The Factory
Use 1R-1297 Belts With Special Application Drive Wheels Use 1R-1297 Belts With Special Application Drive Wheels
Oil Pan Cracking Oil Pan Cracking
Grade Control Valve Contamination Grade Control Valve Contamination
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Oil In Turbochargers Oil In Turbochargers
Incorrect Engine Arrangement Numbers Shown On Customer Invoices Incorrect Engine Arrangement Numbers Shown On Customer Invoices
Serial Information Number (SIN) Decal Replacement Serial Information Number (SIN) Decal Replacement
9X-4606 Lip Seal May Leak At Torque Converter Output Shaft And Transfer Gear Input 9X-4606 Lip Seal May Leak At Torque Converter Output Shaft And Transfer Gear Input