Machines Experiencing Brake Overheating Due To Repetitive Braking At High Speed
Usage:
INTEGRATED TOOLCARRIERS
938F (1KM1-UP) WHEEL LOADERS
WHEEL LOADERS
IT38F (6FN1-UP) INTEGRATED TOOLCARRIERS;938F (1KM1-UP) WHEEL LOADERS
Problem:
Machines that are working in applications where repetitive braking at high speed occurs several times per minute may require brake cooling.
Solution:
In order to provide brake cooling for these applications, an axle oil cooler kit is now available. A field installed axle oil cooler kit is available from Paul Wever Construction Equipment Company, Inc. Information regarding pricing, ordering, and product support of the axle oil cooler kit may be obtained from the Paul Wever Construction Equipment Company, Inc. by telephone at either (800) 990-7923 or (309) 965-2005 and by FAX at (309) 965-2905.
COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Improperly Torqued Hardware On Driveshaft Yokes Improperly Torqued Hardware On Driveshaft Yokes
Compactors May Seem Underpowered When Used In Certain Applications Compactors May Seem Underpowered When Used In Certain Applications
Some 163-1877 (Windshield) Washer Groups Have Been Assembled Incorrectly Some 163-1877 (Windshield) Washer Groups Have Been Assembled Incorrectly
Incorrect Service Literature Incorrect Service Literature
Generator Lead Connections Can Rub Against The Terminal Box Or Each Other Generator Lead Connections Can Rub Against The Terminal Box Or Each Other
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
Oil Transfer Will Dilute Transmission Oil Oil Transfer Will Dilute Transmission Oil
Engine Oil Filler Cap Loosens Engine Oil Filler Cap Loosens
Certain Pavers May Turn Slightly When Starting And Stopping Certain Pavers May Turn Slightly When Starting And Stopping
Bolts On Tension Cylinder Mounting Bracket May Not Have Adequate Torque Bolts On Tension Cylinder Mounting Bracket May Not Have Adequate Torque
Rust Developing On Cab Doors Rust Developing On Cab Doors
Repairing Backhoe Loader Swing Frames Repairing Backhoe Loader Swing Frames
Incorrect Seal Installation On The Hydrostatic Drive Causes Leaks Incorrect Seal Installation On The Hydrostatic Drive Causes Leaks
Machines That Are Equipped With 136-4652 Cleaner Bar Group Have Experienced Finger Loosening Machines That Are Equipped With 136-4652 Cleaner Bar Group Have Experienced Finger Loosening
108-5933 Ride Control Accumulator 108-5933 Ride Control Accumulator
Steering Effort May Increase Steering Effort May Increase
Procedure To Stop Oil Leaks From Around Engine Breather Cover Procedure To Stop Oil Leaks From Around Engine Breather Cover
Ground Speed Calibration Factor May Have Not Been Entered At The Factory Ground Speed Calibration Factor May Have Not Been Entered At The Factory
Use 1R-1297 Belts With Special Application Drive Wheels Use 1R-1297 Belts With Special Application Drive Wheels
Oil Pan Cracking Oil Pan Cracking
Grade Control Valve Contamination Grade Control Valve Contamination
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Oil In Turbochargers Oil In Turbochargers
Incorrect Engine Arrangement Numbers Shown On Customer Invoices Incorrect Engine Arrangement Numbers Shown On Customer Invoices