Usage:
27May2015 |
Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1008075/">100-8075 CLAMP ASSEMBLY ON CERTAIN 3508B, 3512, 3512B, 3512C, 3512C HD, 3516, 3516B, 3516B HD, 3516C, 3516C HD, G3508B, G3512, G3512B, G3516, G3516B, G3516C, AND G3520C ENGINES, LOCOMOTIVE ENGINES, PETROLEUM ENGINES, AND GENERATOR SETS, PM3516, PM3516C HD, AND PMG3516C POWER MODULES |
|
1306 1307 | PS44754 |
NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44754" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
TERMINATION DATE |
31May2017 |
PROBLEM
The existing clamp may fail on certain 3508B, 3512, 3512B, 3512C, 3512C HD, 3516, 3516B, 3516B HD, 3516C, 3516C HD, G3508B, G3512, G3512B, G3516, G3516B, G3516C, and G3520C Engines, Locomotive Engines, Petroleum Engines, and Generator Sets, PM3516, PM3516C HD, and PMG3516C Power Modules. If the existing clamp fails it may cause an oil leak. |
AFFECTED PRODUCT
Model | Identification Number |
3508B | 2HW00388-00389 |
3512 | 50Y01911-01912 YBA00182 |
3512B | 3ZW01203 LDF00326-00329, 331 S2H00657-00659 WF200105, 108-112 YAY01221, 1224, 1236-1240 |
3512C | E3W00378, 381 LLA04457, 4464-4467, 4470-4471 R1A01956, 1958, 1961 SLM00581-00582 YBD00186-00192 |
3512C HD | F2X00315, 319 WF500176, 183-185, 187-189, 191-199, 201-207, 209-210, 212-217, 220 |
3516 | YBS00164-00165 |
3516B | YAP00688 YBT00346-00347 ZBP00210 |
3516B HD | YAR00601, 604-606 |
3516C | AL200115, 117-118 PES01092 SFJ00494-00499 TTH00917, 920, 928-929 |
3516C HD | SEK00651-00653, 655-659, 662-667, 673 TKR00210 |
G3508B | RBK01443-01450, 1452-1453 |
G3512 | WPR01635-01636 |
G3512B | JHH01035-01036 |
G3516 | L6A00238, 240-247 WPT01588-01590 |
G3516B | JEF02838-02848 |
G3516C | F6M00151, 154 |
G3520C | GZJ00688 |
PM3516 | NBR00671, 945, 951 |
PM3516C HD | N1M00143, 145, 148, 156 |
PMG3516C | JKK00240, 277-278, 280-282 |
PARTS NEEDED
Qty |
Part Number | Description |
2 | 1008075 | CLAMP AS (as needed) |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 15% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Replace the 1008075/">100-8075 Clamp Assemblies installed on the engine with new clamps. Up to 2 are installed per engine in the engine oil lines group. |
SERVICE CLAIM ALLOWANCES
0-36 mo |
NOTE: This is a 4.0-hour job | ||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |