Before/After
| PRODUCT SUPPORT PROGRAM FOR REWORKING THE PIVOT SHAFT ASSEMBLY ON CERTAIN HH44 DE HARVESTER HEADS |
7117 6320 7050
|
PS44715 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44715" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The 366-3603 Pivot Pin welding to the 366-3604 Side Plates may crack and cause one of the pin ends to fail, in some applications, on certain HH44 DE Harvester Heads. If the existing plates crack, it can result in extended downtime for repair. |
Qty |
Part Number |
Description |
1 |
3663544 |
PIVOT AS |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Refer to REHS9628, Special Instruction, "HH44DE Pivot Pin - FPG Brazil", in order to complete this Rework Procedure. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-4000 hrs, 0-24 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
4001-6000 hrs, 25-36 mo |
33.0% |
50.0% |
0.0% |
0.0% |
50.0% |
50.0% |
NOTE: This is a 20.0-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|