PRODUCT SUPPORT PROGRAM FOR REWORKING THE EMERGENCY STOP PUSH BUTTON CONTACTS ON EMCP 4 CONTROL PANELS ON CERTAIN 3512, 3512B, 3516, AND 3516B GENERATOR SETS Caterpillar


PRODUCT SUPPORT PROGRAM FOR REWORKING THE EMERGENCY STOP PUSH BUTTON CONTACTS ON EMCP 4 CONTROL PANELS ON CERTAIN 3512, 3512B, 3516, AND 3516B GENERATOR SETS

Usage:



TEBE2590-00

26Feb2015


O-78

 

Before/After

  
  

PRODUCT SUPPORT PROGRAM FOR REWORKING THE EMERGENCY STOP PUSH BUTTON CONTACTS ON EMCP 4 CONTROL PANELS ON CERTAIN 3512, 3512B, 3516, AND 3516B GENERATOR SETS

7451 4490 7332 1435
PS44655
NOTE:

Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.

NOTE:

This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44655" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.


TERMINATION DATE

28Feb2017

PROBLEM

The emergency stop push button contacts on EMCP 4 control panels on certain 3512, 3512B, 3516, and 3516B Generator Sets, have been incorrectly installed. The generator set will shut down, however the fault alarm will not be logged under Engine Control in the event log menu of the EMCP 4 controller.

AFFECTED PRODUCT

Model Identification Number
3512  YAX00425-00432, 452-465
3512B  YAY01196-01197, 1204-1205, 1209-1214, 1217-1222, 1225-1226, 1228, 1231, 1235-1236, 1238, 1250, 1253-1254, 1256, 1260, 1262-1265, 1267
3512B HD  YAZ00635-00636, 639-640, 644-645, 647-659
3516  YAL00284-00285
3516B  YAP00659-00665, 670-677, 681, 685, 689, 695, 705, 711-712
3516B HD  YAR00575, 581-587, 589-590, 595, 599-600, 605-606, 625-627, 671-674

PARTS NEEDED

No parts needed for this program

ACTION REQUIRED

The issue can be rectified by relocating the outer emergency stop push button contacts in the assembly. Refer to the attached Rework Procedure.

SERVICE CLAIM ALLOWANCES

Product smu/age whichever comes first
Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
0-1000 hrs,
0-24 mo 
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
 NOTE: This is a 0.5-hour job



PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
 
 
 


Rework Procedure


 
1. Isolate generator set before commencing any work on the unit. Ensure health and safety requirements are adhered to at all times. Also ensure proper Lock Out-Tag Out procedures are followed at all times while work is being performed on the system. Lock out the generator set before commencing any type of work.
 
2. To gain access to the contacts of the emergency stop remove the 8 screws (1) securing the EMCP 4 control panel to generator terminal box as illustrated in Image 1.2.1
Image1.2.1
 
3. Unclip the switch contacts on the outer edge of the block of contacts (1) as illustrated in Image 1.3.1 and relocate them onto the back of the center contacts (2). There is no requirement to disconnect any of the wiring to complete this rework. An illustration of the switch contacts (1) after the rework is completed can be seen in Image 1.3.2.
Image1.3.1
Image1.3.2
 
4. Place the EMCP4 control panel plate on the generator terminal box and secure with the 8 screws previously removed in Step 2.

With the generating set in standby mode, run a functional test on the emergency stop push button; the alarm will be recorded in both the engine and controller event logs. Clear the generator set area and put system back into service.
 
 

Caterpillar Information System:

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS VERIFICATION / SERIAL NUMBER LABELS ON CERTAIN DIESEL PARTICULATE FILTERS SOLD INTO CALIFORNIA IN THE YEAR 2009. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS VERIFICATION / SERIAL NUMBER LABELS ON CERTAIN DIESEL PARTICULATE FILTERS SOLD INTO CALIFORNIA IN THE YEAR 2009.
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR TO AIR AFTER COOLER (ATAAC) ON CERTAIN C27 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR TO AIR AFTER COOLER (ATAAC) ON CERTAIN C27 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRELUBE PUMP ON CERTAIN G3516H AND G3520H GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRELUBE PUMP ON CERTAIN G3516H AND G3520H GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR SEALING THE CYLINDER BLOCK TO FLYWHEEL HOUSING JOINT ON CERTAIN 3512C HD LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR SEALING THE CYLINDER BLOCK TO FLYWHEEL HOUSING JOINT ON CERTAIN 3512C HD LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR MODIFYING THE FLYWHEEL HOUSING AND INSTALLING A PAPER BEADED GASKET ON CERTAIN 3512C HD LOCOMOTIVE ENGINES AT PLANNED COMPONENT REBUILD PRODUCT SUPPORT PROGRAM FOR MODIFYING THE FLYWHEEL HOUSING AND INSTALLING A PAPER BEADED GASKET ON CERTAIN 3512C HD LOCOMOTIVE ENGINES AT PLANNED COMPONENT REBUILD
PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE INTEGRAL TANK ON CERTAIN C9 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE INTEGRAL TANK ON CERTAIN C9 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE SOFTWARE ON CERTAIN C7.1 GENERATOR SETS (XQ200 POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE SOFTWARE ON CERTAIN C7.1 GENERATOR SETS (XQ200 POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEEL TRANSMISSION LINES ON CERTAIN TH55-E70 AND TH55FT-E90 PETROLEUM TRANSMISSIONS AND PETROLEUM PACKAGES PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEEL TRANSMISSION LINES ON CERTAIN TH55-E70 AND TH55FT-E90 PETROLEUM TRANSMISSIONS AND PETROLEUM PACKAGES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GAS INLET ELBOW ON CERTAIN 3512C DYNAMIC GAS BLENDING OIL WELL SERVICE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GAS INLET ELBOW ON CERTAIN 3512C DYNAMIC GAS BLENDING OIL WELL SERVICE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL LINES ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL LINES ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP ON CERTAIN C7.1 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP ON CERTAIN C7.1 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUSES ON CERTAIN PMG3516C (XQ1475G) POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUSES ON CERTAIN PMG3516C (XQ1475G) POWER MODULES
PRODUCT SUPPORT PROGRAM FOR A MISSING SHIPPED LOOSE 150-1240 OIL PRESSURE SWITCH ON CERTAIN G3508, G3508B, G3512B, G3516, AND G3516B ENGINES PRODUCT SUPPORT PROGRAM FOR A MISSING SHIPPED LOOSE 150-1240 OIL PRESSURE SWITCH ON CERTAIN G3508, G3508B, G3512B, G3516, AND G3516B ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 4350019 ROD ASSEMBLIES ON CERTAIN WS305 XD WELL STIMULATION PUMPS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 4350019 ROD ASSEMBLIES ON CERTAIN WS305 XD WELL STIMULATION PUMPS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD BRACKET FASTENING HARDWARE, RELOCATING THE PRELUBE PUMP, AND REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C POWER MODULES (XQ1475G POWER MODULES)- MULTIPLE REPAIRS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD BRACKET FASTENING HARDWARE, RELOCATING THE PRELUBE PUMP, AND REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C POWER MODULES (XQ1475G POWER MODULES)- MULTIPLE REPAIRS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE CONTROL VALVE MOTOR MOUNT ASSEMBLY ON CERTAIN C175-16 LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE CONTROL VALVE MOTOR MOUNT ASSEMBLY ON CERTAIN C175-16 LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN RETROFIT SELECTIVE CATALYTIC REDUCTION SYSTEMS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN RETROFIT SELECTIVE CATALYTIC REDUCTION SYSTEMS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SOFTWARE ON CERTAIN 3516C, AND C175-16 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SOFTWARE ON CERTAIN 3516C, AND C175-16 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VIBRATION DAMPER ON CERTAIN C175-16 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE VIBRATION DAMPER ON CERTAIN C175-16 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ENGINE JACKET WATER LINE LEAKS ON CERTAIN PM3516 POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ENGINE JACKET WATER LINE LEAKS ON CERTAIN PM3516 POWER MODULES
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.