1999/10/11 Caterpillar


Lubrication Of The Drive Shaft Spline {3251,3253}

Usage:


914G (7ZM, 9WM) Wheel Loaders;
IT14G (8ZM, 1WN) Integrated Toolcarriers


Illustration 1. Drive Shaft. Grease Fitting (1).

Wipe the grease fitting before you lubricate the grease fitting.

1. Start the engine. Release the parking brake. Fully articulate the machine to the left or to the right.

2. Lower the bucket to the ground. Engage the parking brake. Stop the engine.

3. Apply lubricant to the grease fitting that is on the drive shaft spline.

4. Start the engine. Raise the bucket. Release the parking brake. Articulate the machine until the machine is straight.

5. Lower the bucket until the bucket exerts a slight downward pressure on the ground. Stop the engine. Engage the parking brake.

Caterpillar Information System:

1999/10/11 Improved Fuel Water Separator Reduces Plugging Of The Fuel Priming Pump {1258,1260,1263}
1999/10/11 New Storage Box Available {7268}
1999/10/11 New Bypass Valve Used To Avoid Overcooling Of Hydraulic Oil {5071}
1999/10/11 Correction To Power Train "Electronic Control System", SENR8688-01 {3030}
1999/10/11 New Hydraulic Tank Baffle Assembly Is Available For 793 Off-Highway Trucks {5002}
1999/10/11 Window And Door Groups Featuring New Window Latches Released For "C" Series Cabs {7308,7310}
1999/10/11 Jacket Water Heater Aids In Starting In Cold Weather {1383}
1999/10/11 Back Tilt Knob Kit Now Available {7324,7321}
1999/10/11 Work Lamp Bracket Strengthened {1354}
1999/10/04 MTS Belt Tracking Procedure {4198}
1999/10/04 New Conveyor Planetaries Refill Capacities {5629}
1999/10/04 Correction To Axle Differential Oil Refill Procedure In Operation And Maintenance Manuals SEBU6865, SEBU7017, SEBU7111, And SEBU7112 {3258}
1999/10/11 Changes In Service Parts For Carden (Axle) Shaft Assemblies {3251,3259}
1999/10/11 Improved Load Control Valve Now Available {5472}
1999/10/11 Hydraulic Quick Coupler Pin Now Available For Improved Fit Up {6129}
1999/10/18 Recommendations To Extend Transmission Clutch Service Life After Rebuild {3065}
1999/10/18 New Hump Hose And Adjustment Procedure Improve Service Life {5057}
1999/10/18 New Relief Valve Has Improved Service Life {3182,3064}
1999/10/18 Supplement To Correct Specifications On Final Drive {4050}
1999/10/18 New Automatic Retarder Control Available {3121}
1999/10/18 Correct Oil Must Be Used In Brake, Steering And Hoist Systems {4250,5050}
1999/10/18 A Special Instruction Is Now Available For Installing A Cab Door On A Skid Steer Loader {7308}
1999/10/18 New Service Interval For Torque On New And Reinstalled Wheels {4208}
1999/10/18 Correction To The Converter Outlet Pressure {3030,3101}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.