1999/08/02 Caterpillar


914G & IT14G Speeder Models Are Now Standard Production Machines {3000,7000}

Usage:


914G (7ZM, 9WM) Wheel Loaders;
IT14G (1WN, 8ZM) Integrated Toolcarriers

The 914G STD (7ZM) and the IT14G STD (8ZM) machine configurations became non-current on April 1, 1999. The 914G (9WM) and IT14G (1WN) models have now become the standard production machines. See Table 1.

Dealers ordering for European countries should refer to the Mandatory Attachments Section of the machine price list titled, "Regional Preparations (For Roading and Safety Homologation)."

A road speed option must be selected for machines ordered for European countries. The road speed options that are available to meet the TUV requirements for Germany are provided in Table 2.

Caterpillar Information System:

1999/08/02 New Oil Pump Group Used {1304}
1999/08/02 Engine Derate Parameter On Electronic Technician And Vital Information Management System May Give False Value {7620}
1999/08/02 Procedure For Converting Standard Controls To Finger Tip Controls {4343}
1999/08/02 Identifying The Engine In A Backhoe Loader {1000,1001}
1999/08/02 Cold Start Advance Solenoid Available {1272,1250}
1999/07/26 New Location For Ground Wire{1408,7423}
1999/07/26 An Improved Throttle Cable Is Available For Certain Soil And Asphalt Compactors{5462}
1999/07/26 Revised Repair Procedure For Large Off-Highway Truck Bladder Type Accumulators{0374,4331}
1999/07/26 New Bracket Assembly And Clamps In Water Lines Groups Provide Improved Tube Retention{1380}
1999/07/26 Improvements Have Been Implemented On The Superstructure Of Large Off-Highway Trucks{7050}
1999/07/26 Filtered Adapter Reduces False Air Filter Warnings{7400,7452}
1999/07/26 Correction To Service Manual Module SEBU6757; Operation & Maintenance Manual{0374,0375}
1999/08/02 New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/08/02 New Material Improved Durability for STAY CLEAN VALVE(r) in Caterpillar High Efficiency Fuel Filters {1262}
1999/08/09 Reporting Incidents Through The Cat Neutral Net {0374}
1999/08/09 Extra Support For Center & Rear Brake Lines {4257}
1999/08/09 New Pressure Switches With Improved Reliability {1435}
1999/08/09 New Hydraulic Oil Change Procedure Used {3080,0374,0375,5056}
1999/08/09 New Motor Groups for 914G & IT14G SPDR Machines Provide Increased Serviceability {5058}
1999/08/09 A Special Instruction For Installing Cab Visors Is Available {7301,7310,0374}
1999/08/09 New Design Improves Durability Of Quick Disconnect Nipple {5050,0618}
1999/08/09 Correction To Special Instruction, REHS0494 {7620}
1999/08/17 Use 160-3935 Centering Guide For Aligning Rear Axle Housings {4131}
1999/08/17 Correction To Parking Brake Assembly & Disassembly, SENR1217 {4267}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.