1999/06/14 Caterpillar

Dimensions For Articulated Hitches, Lift Arms, Front And Rear Levers, And Oscillating Rear Axle Assemblies Is Now Available In A New Special Instruction {3260,3268,6116,6118,6119,6125,6126,6127,7057,7069,7100}

Usage:

IT12F (1KF),
IT14B (3NJ),
IT14F (4EL),
IT14G (8ZM, 1WN),
IT18B (4ZD, 1DF, 2NJ),
IT18F (6ZF, 5EJ, 8GJ),
IT24F (4NN, 6KN),
IT28B (5SD, 1HF, 1JK),
IT28F (1JL, 3CL),
IT28G (8CR, 9AR) Integrated Toolcarriers;
902 (7ES),
906 (6ZS),
910E (1SF, 1YK),
910F (1SF, 1YK),
914G (7ZM, 9WM),
916 (2XB, 9WB, 5KC),
918F (3TJ, 2CK, 5DL),
920 (41J, 62K),
924F (5NN, 6MN, 7PN),
926E (4NB, 8NB, 94Z),
928F (8AK, 2XL, 7YM),
928G (6XR, 7SR),
930 (41K) Wheel Loaders

Special instruction REHS0276, "Dimensions for Articulated Hitches, Lift Arms, Front and Rear Levers, and Oscillating Rear Axle Assemblies," is now available. Machines covered by REHS0276 include Integrated Toolcarriers along with small and compact Wheel Loaders.

The 56-page guide provides original dimensions which are beneficial when inspecting existing parts or for repairing worn or damaged parts.

REHS0276 can be obtained through normal literature ordering channels.

Caterpillar Information System:

1999/06/14 New Door Gas Spring Has Improved Service Life {7308}

1999/06/14 New Fender Available {7252}

1999/06/14 Service Installation Of 165-7948 Check Valve {4304}

1999/06/14 New Special Instruction For 793 Off-Highway Truck Front And Rear Wheel Adapter Kit Installation Available {4200,4200}

1999/06/14 Chassis And Cab Harnesses Must Be Replaced As A Set {3168,3030}

1999/06/14 Correction To Service Manual Module SEBU6757; Operation & Maintenance Manual {0374,0375,1105}

1999/06/14 Suggested Ways To Increase 3500 Unit Injector Service Life {1290}

1999/06/14 Rear Window Latch Improved {7310}

1999/06/14 Improved Differential Lube Pump Shaft Prevents Leakage {3258,4009,4129,4134}

1999/06/07 Addition Of Rubber Flashing To Transverse Beam{6648}

1999/06/07 Checking The Oil Level In Axles Properly Reduces Erroneous Readings{3268}

1999/06/07 Correction To Specifications Manual, RENR3003; "Feed Roller Motor For HH75 Harvester Head"{0374,5058}

1999/06/14 Recommended Lubricant For Cab Door Locks And Hood Locks {7251,7273,7308}

1999/06/14 New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}

1999/06/21 New Components Provide Improved Sealing In Engine Exhaust Manifold Groups {1059}

1999/06/21 New Oil Pump Group Used {1304}

1999/06/21 Correction To Electronic Implement Control System Manual, SENR5891-02; "Normal Operation" {0374,5000,5700}

1999/06/21 Installation Of The Brake Piston {4250}

1999/06/21 Improved Bonding For Longitudinal Stability Indicator Strain Sensor {7856}

1999/06/21 Proper Usage For The Steer Assist Switch {4129,1400}

1999/06/21 Drain Water And Sediment From The Fuel Tank Daily {1273}

1999/06/21 Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}

1999/06/21 Methods Of Providing Feedback On Diagnostic Information {7569}

1999/06/28 Fender Mud Flaps Available {7252,4220}