Identification Of Minifuses, Minifuse Blocks, And Minifuse Locks For Operator Station Instrument Panel {7451,1417}
Usage:
914G (7ZM, 9WM),
928G (6XR, 7SR) Wheel Loaders;
IT14G (8ZM, 1WN),
IT28G (8CR, 9AR) Integrated Toolcarriers
The minifuses, minifuse blocks, and minifuse locks for the operator station instrument panel for the above machines are identified in Chart 1.
Illustration 1.
Instrument Panel Group (Typical).
The minifuses, minifuse blocks, and minifuse locks are service parts of the Main Cab Harness Assembly. Illustration 1 is a view of the Operator Station Instrument Panel and shows the location of the minifuse components.
Chart 2 provides a reference of applicable parts manuals, usage, and next level groups in order to help the user determine service parts needs.
Caterpillar Information System:
1999/05/03 Improved Gas Springs Increase Service Life {7254}
1999/05/03 Electroplated Axle Mounting Hardware Requires Changes In Torque Procedure And Specifications {3268}
1999/05/03 Corrections To Electrical System Schematics SENR6735, SENR6737, SENR5985, And SENR1229 {1400}
1999/05/03 Fully Hydraulic Brake System Now Standard Production {4251}
1999/05/03 Installation Procedure For The Fuel Injection Plate On The 914G/IT14G {1251}
1999/05/03 Correction To Engine Oil Change Interval {1348}
1999/05/03 Correction To Testing And Adjusting Manual RENR2115-01; Torque Converter Stall And Implement Pump Double Stall - Test {0374,3101,5055,7000}
1999/05/03 New Engine Oil Filler Used {1316}
1999/05/03 Weld Procedure For Field Repair Of Certain Large Off-Highway Truck Differential Housings {4050}
1999/05/03 Serviceable Parts Available For Low Pressure Turbocharger In Low Altitude Engine Arrangement {1052}
1999/05/03 144-0835 Pump Enhancements {1714}
1999/05/03 Improved Cab Harness Accommodates Additional Relay {1408}
1999/05/03 Improved Rotor Hood Side Disk Pivot Now Available {6635,5608}
1999/05/03 New Mounting Arrangement Used For Pulse Width Modulated Steering Sensor {4800}
1999/05/03 Operation Of The Hydraulic Screed Counterbalance System {5051,5420}
1999/05/03 Revision To Special Instruction, SEHS9043, "Field Installation Of Valves For Scheduled Oil Sampling" Is Available {7542}
1999/05/10 Improved Throttle Lever Increases Service Life {1265}
1999/05/10 Additional Serviceable Parts Available For Front Axle {3020}
1999/05/10 Improved Idlers (D7R-D11R) and Improved Rollers (D9R, D11R) With Symmetrical Duo-Cone Seals Now Available {4159,4180}
1999/05/10 Corrections For Special Instruction REHS0082-01 And Special Instruction REHS0267 {3030,3124}
1999/05/10 Service Parts For Electric Drive Pump In Secondary Drive System {5703,4324,4354}
1999/05/10 Incorrect Service Interval Specified For Battery, Battery Cable And Disconnect Switch {1402,1401,1411,7528}
1999/05/10 Incorrect psi Conversion Of Accumulator Precharge Pressure {5077}
1999/05/10 New Implement Control Groups Available With Numerous Enhancements {5700,5701,7620}