1999/04/12 Caterpillar


New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}

Usage:


All Caterpillar Machines Powered By Caterpillar Diesel Engines

SUPPLEMENT: MAY 17, 1999

Service Magazine SEPD0466, Article 14, Page 14, April 12, 1999; "New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999".

Some of the part numbers in the last line of the chart are not correct. A corrected chart follows:

--------------- END SUPPLEMENT ---------------

Beginning in the first quarter of 1999, all Caterpillar High Efficiency Fuel Filters will include a STAY CLEAN VALVE® on the clean side of the filter. The STAY CLEAN VALVE® will prevent unfiltered fuel, which may contain abrasive contaminants, from entering the clean side of the fuel filter. Unfiltered fuel may cause damage to the engine's fuel system.

Fuel filter prefill practices are harmful to fuel systems, and should always be avoided. Proper fuel filter maintenance requires priming the replacement filter at the time of installation. Many operators and mechanics prefill replacement filters with used fuel from spent filters. This practice allows dirty fuel to bypass the fuel filter media and enter the clean side of the filter. Prefilling a fuel filter compromises the integrity of an engine's fuel system by allowing unfiltered fuel to enter the system and contaminate sensitive fuel injectors and pumps. A priming pump should be used to prime replacement filters with fuel. IT IS IMPORTANT TO PRIME, AND NOT PREFILL, REPLACEMENT FILTERS IN ORDER TO ENSURE THAT FUEL SYSTEMS RECEIVE FILTERED FUEL ONLY.

With today's higher injection pressures, and closer injector tolerances, clean fuel best delivers maximum engine performance. High efficiency fuel filtration, at 2 microns absolute, has been proven to be essential in preventing fuel system contamination and abrasive injector wear.

As of February 1999, Caterpillar High Efficiency Fuel Filters with STAY CLEAN VALVES® canceled and replaced Caterpillar Standard Fuel Filters. Standard Back-Up Filters are also available, but under restricted conditions. The chart identifies the new and former fuel filters.

Caterpillar Information System:

1999/03/29 Use 160-0772, 160-0774 And 160-0775 Wire Brushes For Tough Cleaning Jobs {0674}
1999/03/29 Maximizing Off-Highway Truck Brake System Life And Improving Reliability {4251,4255}
1999/03/22 New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/15 Caterpillar Prelub Troubleshooting {1400,1469}
1999/03/15 New Top Piston Rings Available {1215}
1999/03/08 New 152-8256 (115V) And 154-4853 (220V) Air Conditioning Refrigerant Recovery, Recycling, And Manual Recharging Station For R134A Refrigerant {7320,1809}
1999/03/08 New 150-7762 And 150-7745 (Trailer Mounted) Hot Water Pressure Washers For Cleaning Large Components {0680}
1999/03/08 Use 138-8447 Aerosol Rust Preventative As A Corrosion Inhibitor {0645}
1999/03/08 Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads {1100,0703}
1999/03/08 Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08 Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/02/22 Shielded Metal Arc Welding And Flux Cored Arc Welding Information {0679}
1999/04/12 Special Instruction, REHS0345-01, "Generator Service Literature Index" Is Available {4450}
1999/04/26 Stronger Brush Springs Improve Actuator Service Life On Flexxaire Fans{1356}
1999/04/26 Flexxaire Fan Interactive Product Guide CD Now Available{1356}
1999/04/26 Available Rebuild Options For Flexxaire Fans{1356}
1999/05/03 Revision To Special Instruction, SEHS9043, "Field Installation Of Valves For Scheduled Oil Sampling" Is Available {7542}
1999/05/17 New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17 New 147-4438 Power Supply Group For Floor Model Hose Machine Now Available {0684}
1999/05/17 Use 156-1060 Gas And 156-1070 Gas And Diesel Engine Analyzer To Check Emissions {1088,0781}
1999/05/24 New 153-9630 Sensor Test Group Adapter Kit For DataView Now Available{1000,3000,4000,5000,6000,0788,0785}
1999/05/24 Use 157-3716 (Exhaust) And 157-3717 (Intake) Valve Seat Drivers To Install Valve Seats In Engines With Unfinished Valve Guides{1103,0703}
1999/05/24 New 155-5175 AC Current Probe For Generator Sets Now Available{1400,4450,0734,7002}
1999/05/24 New Main Bearing Material{1203}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.