Correction To Service Manual Module, SENR6794-01, Specifications, 938G Wheel Loader And IT38G Integrated Toolcarrier Hydraulic System{0374,1386}
Usage:
IT38G (7BS, 1CW) Integrated Toolcarriers, 938G (4YS, 6WS, 8RS, 9HS) Wheel Loaders
Reference: Service Manual Module, SENR6794-01, Specifications, 938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System; Page 6, "Fan Drive Motor".
On Page 6, the fan drive motor pressure setting is incorrect. The correct pressure setting should read as follows:
Pressure setting at a flow rate of 4.2 L/min (1.1 U.S gpm) ... 11988 kpa (1740 psi)
Caterpillar Information System:
1998/05/04 Procedure For Adjusting Hood Side Panels{7251}
1998/05/04 New Custom Product Support Literature Is Available For 776D Tractors And 777D Off-Highway Trucks Equipped With 3Z-6435 Tachograph Arrangement (Factory/Field Installation){0374,7317}
1998/05/04 New Custom Product Support Literature Is Available For 773D And 775D Trucks Equipped With 3Z-6309 Engine Pre-Lubrication Group (Field Retrofit){0374,1469,1300}
1998/05/04 Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}
1998/05/04 New Pumps For C-Series Backhoe Loaders{5070}
1998/05/04 Field Installation Of The CD Player{7338}
1998/05/04 Improved Final Drive Pinion Bearing Setting Procedure Used And New Shim Pack Kit Available{4050,4091}
1998/05/04 Procedure To Retrofit 1R-0762 "Radial Seal" Filter Assembly{1260,1262}
1998/05/04 New Coolant Level Sensor And Harness Assembly Improves Ground Path{1377,7470}
1998/04/27 Ladder Clamps Added To Secure Conveyor Pump EDC Wires {5702}
1998/04/27 Grade Controls-New Setup Screens {5645,7220}
1998/04/27 New Improved Parking Brake Switch Has Heavy Duty Switch And Contacts {7451}
1998/05/04 New Fans Improve Reliability Of The Air Conditioner Condenser Group{1805,7320}
1998/05/04 Improved Alternator Groups Now Available{1405}
1998/05/04 ROPS Instruction Film Available Through Parts Service{7177,7405}
1998/05/04 Correction To 9C-8172 Brake & Planetary Group{0374,4011,4255}
1998/05/11 New Gear Assembly And Stub Shaft Used In Front Gear Group {1206}
1998/05/11 New Intermediate Cylinder In Hoist Cylinder Increases Clearance Between Rod And Head To Prevent Binding {5102}
1998/05/11 Weld Repair Procedure For Rear Upper Front Strut Mounting Plates {7050,7201}
1998/05/11 New Rock Ejector Assembly Reduces Tire Damage {7157}
1998/05/11 Service Intervals For RAYCOR Fuel Filter Group {1261,1250,1280}
1998/05/11 Supplement To Correct Bearing Cap Torque For Differential {3258}
1998/05/11 Supplement To "Improvements To Brake Caliper Seals Prevent Leaks In High Temperature Applications" {4256}
1998/05/11 Operation Of The Conveyor System In Manual Override {6631,5643}