1998/04/27 Caterpillar


Revised Walk-Around Inspection Chart, SELU7039-01, Now Available {0374,7000}

Usage:


IT38G (7BS, 1CW) Integrated Toolcarriers

A revised Daily Walk-Around Inspection chart is available for the machines listed. The revised chart provides updated service information for personnel and operators and is a quick reference to use when performing maintenance procedures.

The service chart is available through normal literature ordering channels using the following media number:

* SELU7039, Caterpillar IT38G Integrated Toolcarrier Lubrication and Maintenance Intervals.

Caterpillar Information System:

1998/04/27 New Lubrication And Maintenance Interval Decal, SEEU7039, Now Available {0374,0653,7000}
1998/04/27 Improved Material Deflector For Primary Conveyor Is Available {6621}
1998/04/27 Effectivity Date For Caterpillar Extended Life Coolant In Machines Shipped From CPPI {1350,1395}
1998/04/27 New Piston Pump For Brake, Steering, And Hoist Systems Has Longer Service Life {5070,4268,4306,5083}
1998/04/27 Orifice In Control Valve Prevents Sudden Stop Of Truck Body When Hoist Control Is Returned From Raise To Hold {5136}
1998/04/27 Flushing Procedure Assures Correct Operation Of Implement Control Valves {5051}
1998/04/20 Change Implemented To Reduce Rear Hopper 102-9849 Hinge Pin Failures{6639}
1998/04/20 1U-5551 Extension Valve Needed To Check Nitrogen Charge Pressure In Belt Tension Accumulators{4197,5077}
1998/04/20 New Improved Fuel Fill Cap For Asphalt Pavers{1273}
1998/04/20 Improved Rear Fender Kits Are Available{7252}
1998/04/20 Propel Motor Displacement Screw Settings{4351}
1998/04/20 New Decals Striping For Dump Bodies{7559,7581}
1998/04/27 Gear Box Dipstick Is Now A Plug {4350}
1998/04/27 New Improved Parking Brake Switch Has Heavy Duty Switch And Contacts {7451}
1998/04/27 Grade Controls-New Setup Screens {5645,7220}
1998/04/27 Ladder Clamps Added To Secure Conveyor Pump EDC Wires {5702}
1998/05/04 New Coolant Level Sensor And Harness Assembly Improves Ground Path{1377,7470}
1998/05/04 Procedure To Retrofit 1R-0762 "Radial Seal" Filter Assembly{1260,1262}
1998/05/04 Improved Final Drive Pinion Bearing Setting Procedure Used And New Shim Pack Kit Available{4050,4091}
1998/05/04 Field Installation Of The CD Player{7338}
1998/05/04 New Pumps For C-Series Backhoe Loaders{5070}
1998/05/04 Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}
1998/05/04 New Custom Product Support Literature Is Available For 773D And 775D Trucks Equipped With 3Z-6309 Engine Pre-Lubrication Group (Field Retrofit){0374,1469,1300}
1998/05/04 New Custom Product Support Literature Is Available For 776D Tractors And 777D Off-Highway Trucks Equipped With 3Z-6435 Tachograph Arrangement (Factory/Field Installation){0374,7317}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.