Use 9U-6803 Tester For Hydraulic Cylinders {7562}
Usage:
All Models
Warranty: G
Features/Benefits
-
- * Used to test hydraulic cylinders after reconditioning or repair (ensures that cylinders perform to correct specifications).
- * Provides an efficient and simple method of testing cylinders.
- * Pressures can be regulated between 2067 and 20670 kPa (300 and 3000 psi).
- * Remote controlled, pressure-compensated pump provides fast cycling of cylinders.
- * Large hydraulic reservoir allows unit to test all Caterpillar and most other double-acting cylinders.
- * Control panel simplifies testing and gauges are large and easy to read.
- * After cylinder has been tested, oil is removed by using shop air pressure
- * Unit is equipped with low-friction caster wheels.
- * Operates on 440 volt, three phase power (can be customer adapted to 220 volt, three phase).
- * Used to test hydraulic cylinders after reconditioning or repair (ensures that cylinders perform to correct specifications).
Specifications/Technical Information
- Pump capacity - 80 Lpm (21 gpm)
- Reservoir - 227 L (60 gpm)
Cylinder Tester
Reference: Brochure; NEHP5580; Cylinder Tester Tool Operating Manual; NEHS0595; Cylinder Tester.
Caterpillar Information System:
1998/03/30 Use 7X-1703 Adapter Group For Mounting 7X-1700 Communication Adapter On 8T-8697 ECAP {1900,0781}
1998/03/30 Use Calibration Tools To Set, Test, And Adjust Heavy Sleeve Metering Fuel System {1250,1251}
1998/03/23 Replacements Products Available For 4C-4079 Brake And Component Cleaner{0680}
1998/03/23 Use 143-6092 Pressure Meter To Measure Differential, Static, And Peak Pressures In Hydraulic Systems{3000,4100,4112,4351,5050,5070,5450,5454,0727}
1998/03/23 Replacement Available For 7M-7260 Liquid Gasket{0648,0649,0651}
1998/03/23 Use 142-5055 Insulation Tester Group To Measure And Check Insulation Resistance{4450,0785}
1998/03/23 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fumes Recirculation{1063}
1998/03/23 Use 143-8995 Leak Down Check Tool And 143-8997 Check (Dummy) Valve For Testing Check Valves{1106,0701}
1998/03/23 Use 155-3046 Hex Socket To Remove And Install TPS 57D Turbocharger Band Clamps{1056}
1998/03/23 Use 9U-5156 Tool Group (Part Of 9U-5107 Group) To Clean Prechamber Seats{1106,0680}
1998/03/23 Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23 Use 140-2266 Harness Assembly (70-Pin Breakout "T") For Testing And Adjusting{1900,0781}
1998/03/30 Use 137-2700 Bore Welding Group (110V), 138-8215 Bore Welding Group (110V With Auto-Skip), 138-8212 Bore Welding Group (220V) And 138-8213 Bore Welding Group (220V With Auto-Skip) For Building Up Worn Or Damaged Bores {0672}
1998/03/30 Use Measuring Tools For Crimp Diameter {0700}
1998/03/30 Use 1U-6189 Lamp Tool For Removal And Installation Of Small Control Panel Bulbs {1400,0709}
1998/03/30 Use 136-3642 Crimp Tool Group For 4C-9900 And 6V-4900 Presses {5057}
1998/05/04 Improved Alternator Groups Now Available{1405}
1998/05/04 ROPS Instruction Film Available Through Parts Service{7177,7405}
1998/05/11 New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/18 Entertainment Radios Improved With Increased Reliability {7338}
1998/05/25 New Valve Cover Seal Used {1107}
1998/06/01 Proper Checking For Refrigerant Leaks Ensures Maximum Service Life Of Refrigerant Compressor {1802,1809,7320}
1998/06/01 Manufacturing Process Improvement Increases Reliability Of Speed Sensors {1900}
1998/06/15 Similar Product Support Literature Available For Military Machines{7567}