1998/02/09 Caterpillar


Machines Equipped With Snow Tires Can Prevent Fender Damage {3013}

Usage:


914G (7ZM, 9WM) Wheel Loaders IT14G (1WN, 8ZM) Intergrated Toolcarriers.

When 914G and IT14G machines are equipped with 17.5 tires and snow chains, it is recommended that axle oscillation blocks also be installed. The 914G and IT14G fender webs may get damaged if these machines are equipped with 17.5 tires, snow chains, and no oscillation blocks.

The above chart shows the parts needed to install the oscillation blocks. The frame is already threaded to accept the blocks where the fully oscillated axle will contact the frame. The oscillation blocks will reduce the axle's swing from 11 degrees per side to 8 degrees per side.

Caterpillar Information System:

1998/02/09 VIMS Internal Back-Up Battery Life Expectancy And Replacement Procedure {7601}
1998/02/09 Longer Steering Hose Assembly Eliminates Rubbing {4304}
1998/02/09 Exhaust Bypass Group Changes Provide Improved Reliability, Performance, And Serviceability {1057}
1998/02/09 Additional Brake Studs Are Required To Increase Brake Pressure On Certain Off-Highway Trucks {4061}
1998/02/09 Process Changes Result In Improved 3500 Engine Remanufactured Connecting Rod Assembly {1218}
1998/02/09 New Tie Rods And Spindle Assemblies Improve Service Life {4329,3282}
1998/02/09 Windshield Installation Instructions For 24H Motor Graders {7310,7320,7301}
1998/02/09 Improved Limited Slip Differential Thrust Washers And Hardened Discs Improve Service Life {3263}
1998/02/09 Service Charts And Decals Available {0374,0375}
1998/02/02 Machine Flash Software (Non-Engine Software) Ordered Through The Parts Distribution System Is Now Available Through The Corporate Mail Box {1900,1920}
1998/02/02 New Air Conditioning Accumulators Improve Service Life {7309}
1998/02/02 Neutralizer Switch Corrected For Transmission Electronic Control System {3030,3168}
1998/02/09 New Fan Drive Group (Variable Speed) Provides Increased Service Life {1359}
1998/02/09 8N-4617 Air Cleaner Clamp Kit Available {1051}
1998/02/09 Replacements Products Available For 4C-4079 Brake And Component Cleaner {0680}
1998/02/09 New Shaft Seals Available For Gear Type Hydraulic Pump Groups To Prevent Leakage {5073}
1998/02/09 Proper Reading Of LCD Service Meters {7450,7478,7480}
1998/02/09 Replacement Available For 7M-7260 Liquid Gasket {0648,0649,0651}
1998/02/16 Chrome Tension Cylinder Rods Are More Durable And Improve Seal Life {4197}
1998/02/16 24H Motor Grader Windshield Wiper Now Serviced {7305}
1998/02/16 Special Instruction, SEHS9364-02, "Off-Highway Truck Rear Wheel Salvage", Is Now Available {0374,4208}
1998/02/16 Procedure For Engine Pre-Lubrication System Bypass On Certain Off-Highway Trucks {1469}
1998/02/16 Improved Bearings Used In Transmission Planetary Groups On Certain Off-Highway Trucks {3160,3186}
1998/02/16 Cold Cylinder Cutout Strategy Added To The Electronic Control Module (ECM) Software {1902}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.