1997/01/13 Caterpillar


Use 125-4634 Spanner Wrench Assembly To Remove And Install 110-5425 Nut Retaining Axle Shaft Into Housing{3250,0727}

Usage:


IT14G Integrated Toolcarriers;
914G Wheel Loaders

Warranty: G

Features/Benefits

* Used to remove and install 110-5425 Nut retaining axle shaft into housing (required tool to properly make repairs and adjustments)
* Used with 3/4 inch square drive ratchet or torque wrench
* Designed to reach nut inside of axle housing
* Pilots around axle shaft to provide positive engagement
* Wrench provides means to correctly tighten nut to obtain proper rolling torque on the bearing
* Using other tools to install or remove nut may destroy nut or damage threaded portion of axle shaft
* Hardened for added strength and durability

Specifications/Technical Information

Square drive - 3/4 inch
Outside diameter - 127 mm (5.0 inch)
Inside diameter - 116.5 mm (4.59 inch)
Length - 200 mm (7.9 inch)
Teeth - four equally spaced
Tooth width - 7.5 mm (.30 inch)
Distance between teeth - 103.5 mm 4.07 inch)


125-4634 Spanner Wrench Assembly

Caterpillar Information System:

1997/01/13 1U-9058 Hose Group Provides All Necessary Equipment For Adjusting And Releasing Tension On Mobile-Trac Belts{4197,0766}
1997/01/13 1U-9054 Driver Lifter Removes And Installs Rear Drive Wheel Assembly Using Overhead Lifting Equipment{4199,0729}
1997/01/13 Use 1U-9097 Wrench To Remove And Install Accumulator In Mobile-Trac Tensioning System{4197,0756}
1997/01/13 1U-9055 Idler Lifter Removes And Installs Front Idler Assembly Using Overhead Lifting Equipment{4150,0729}
1997/01/13 1U-6130 Guide Stud, 1U-9785 Guide Stud And 1U-9817 Guide Stud Makes Undercarriage Installation And Removal Much Easier And More Efficient{4150,0729}
1997/01/13 1U-9095 Lifter Group Allows Complete Undercarriage To Be Moved With Fork Lift Or Farm Tractor{4150,0632}
1996/12/30 Flywheel Housing To Cylinder Block Joint Improvements {1157,1201}
1996/12/30 Improved Boom Electrical Harness Routing For Increased Reliability {1408}
1996/12/30 Supplement To Operation And Maintenance Manual; "Dual Position Switch To Operate The Tilt Kickout System" {1435,7451}
1996/12/30 Procedure For Aligning Front Suspension Frame Group With Output Transfer Gearbox {7200}
1996/12/30 New Hydraulic Pump Group Increases Service Life {5070}
1996/12/30 Improved Seals And Bearings Used To Reduce Seal Leaks In Output Transfer Gear Groups {3159,3003}
1997/01/13 Spanner Wrenches And Related Tools To Remove And Install Final Drive Bearing Locknut{4050,0602}
1997/01/13 Use 126-6611 Seal Driver To Install Outboard Oil Seal On Eccentric Group{6605,6606,0727}
1997/01/13 129-7142 Lifting Beam Simplifies Removal And Installation Of Friction Group{6605,0632,0717}
1997/01/13 Fixture Assembly Allows More Accurate Levelling Of Screed Plates{6643,0764}
1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}
1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}
1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/20 Cab Rear Window Improvements Provide Improved Sealing And Visibility {7301,7310}
1997/01/20 Adjustment To Window Hold Back Latch Improves Operation {7301,7310}
1997/01/20 Special Edition, SEPD0325, "Major Improvements And Service Information For 768C, 772B, 776C, 776D Tractors, 771C, 771D, 775B, 775D Quarry Trucks And 769C, 769D, 773B, 773D, 777C And 777D Trucks" Is Available {0374}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.