New Rubber Belt Step Available{7254}
Usage:
784B (5RK) Tractors;
785B (6HK),
789B (7EK) Trucks
Description of Change: The new improved rubber belt steps are available to replace worn and damaged steps.
Adaptable To: The new rubber belt steps are effective with 784B (5RK014) Tractors, 785B (6HK328) Trucks and 789B (7EK271) Trucks. These steps are adaptable to all earlier machines.
NOTE: All the parts are common for all models with the exception of the belt assembly. The quantities listed in the table will build two (2) step assemblies. For 784B Tractors and 785B Trucks, 114-8725 Belt Assembly is used. For 789B Trucks, 104-8608 Belt Assembly is used.
Typical view of ladder group.
Caterpillar Information System:
1996/02/26 Magnetic Plug Now Used On Front Wheels{4208}
1996/02/26 Service Manual And Service Kits Available For Engine Variable Speed Fan Clutch{1359}
1996/02/19 New Brackets Help Prevent Damage To Engine Fuel Injection Lines Groups{1252}
1996/02/19 New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/19 New Bolts And Washers Used In Rear Axle Spindle To Rear Axle Joint Provides Additional Strength To Prevent Bolt Breakage{3260}
1996/02/19 Use Of BIO HYDO Oils in Off-Highway Trucks{3022}
1996/02/12 Closed Engine Crankcase Breather System Maintenance And Repair {1317,1107}
1996/02/12 New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12 New Pressure Switch Assembly Is Available For Fuel Applications; 9G-8011 Pressure Switch Assembly Should Not Be Used In Fuel Applications {7414}
1996/02/12 Replaceable Drawbar Wearplate Eliminates Wear On Support Assembly{7105,7119}
1996/02/05 Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/05 Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/26 New Hoist Valve Reduces Leakage{5136}
1996/02/26 New Troubleshooting Guide Is Needed To Test The Grade/Slope System{7219,7569}
1996/02/26 New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/03/04 Ring Seals No Longer Required At Six Locations In Turbocharger Groups{1052}
1996/03/04 New Interaxle Differential Groups Have New Thrust Discs For Improved Service Life{3258,3287}
1996/03/04 Dimensions For Radio Installation {7338}
1996/03/04 Flash Programming Capability Is Required{1901,1902}
1996/03/11 New Transmission Input Shaft Seal Prevents Leakage{3189,3401}
1996/03/11 Undercarriage Gauge and Belt Width Options{4150,4199,4198}
1996/03/11 Improved Mounting And Valve Group (Retarder Control Valve) Can Be Installed To Improve Retarder Control Valve Service Life{3123}
1996/03/11 New Drum Support Gearbox Used To Improve Service Life{4053}
1996/03/11 New Logic Valves Stop Conveyor Belt Creep{6620,5051}