Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
Usage:
Caterpillar Machines Powered By 3100, 3200, 3300, And 3400 Families Of Engines
Moderate force may be required to install the secondary filter element in a radial seal air filter. The force required will be reduced if the sealing lip of the secondary element is lightly coated with a lubricant. Suitable lubricants in order of preference are:
NOTE: Do NOT get the lubricant on the filter element.
Caterpillar Information System:
1994/04/11 Speed Sensor Available With Improved Reliability{1907}
1994/04/04 Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/03/28 Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/21 The Ninth Edition Of The Lubricating Oils Data Book Is Available From The Engine Manufactures Association (EMA) {1318}
1994/03/21 New Seal Used In Air Lines Group {1058}
1994/03/14 Articles Pertaining To Commercial Engines Or Truck Engines {0374}
1994/02/28 New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28 New Retaining Compound Is Available {0649}
1994/02/28 Soldering Iron Available For Field Use {0709,1400}
1994/02/21 Servicing Lighted Rocker Switches {1435}
1994/02/07 Fuel Injection Pump Improvements{1251}
1994/02/07 Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/04/25 Service Tools For Electronic Controls {0781,0782}
1994/05/16 Fuel Dilution In The Engine Oil{1290,1318}
1994/05/23 Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/30 Three And Five Piece Wheel Rims Reduce The Possibility Of The Tire Bead Not Seating Correctly{4209,4202}
1994/06/20 Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/27 New Assembly Procedure For Hydraulic Pump Groups With Double Shaft Seals And A Weep Hole Between The Seals Helps Prevent Contamination Through The Weep Hole{5073}
1994/07/04 New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/11 Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/08/08 SOS Allowable Soot Level Changed{1318}
1994/08/15 Switches With Screw Terminal And Sure Seal® Connector Replaced By Switches With A DT Connector{1400,7400}
1994/08/22 Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22 New Fuel Priming Pump And Improved Gasket Used{1258}