914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Caterpillar


Attachment Control Group - IT14G

Usage:

NOTE: Coat all pin bores, including lift and tilt cylinders and the bucket, with lubricant. Lubricate the lip of all seals with lubricant being sealed.

NOTE: Install washers, as required, at gap (B) between lift arm and frame to center lift arm assembly between bosses on non-engine end. The maximum gap is 1.6 mm (.06 in)

2G-5672 Washer thickness (new) ... 1.6 mm (.06 in)

6K-2274 Washer thickness (new) ... 3.0 mm (.12 in)

NOTE: Install washers, as required, to provide a minimum clearance between levers and tilt cylinder, levers and lift arms, plates and levers and plates and lift arms at gaps (A).

090-8865 Washer thickness (new) ... 3.0 mm (.12 in)

7X-0618 Washer thickness (new) ... 5.0 mm (.19 in)

Caterpillar Information System:

914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Bucket Control Group - 914G
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Kickout Groups Adjustment Procedure
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Tilt Cylinders
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Lift Cylinders
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Relief Valves
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Hydraulic Control Valves
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Pilot Control Valves
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Hydraulic Tank And Filter
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Hydraulic Pump
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Introduction
Caterpillar IT24F Integrated Tool Carrier Electrical System Caterpillar IT24F Integrated Tool Carrier Electrical System
924F WHEEL LOADER AND IT24F INTEGRATED TOOLCARRIER MACHINE S Hydraulic Control Valve
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Systems Operation
914G WHEEL LOADER & IT14G INTEGRATED TOOLCARRIER HYDRAULIC S Testing And Adjusting
914G Wheel Loader IT14G Integrated Toolcarrier Hydraulic Systems 914G Wheel Loader IT14G Integrated Toolcarrier Hydraulic Systems
914G Wheel Loader and IT14G Integrated Toolcarrier Electrical System (For Serial Numbers 7ZM1-618, 9WM1-1357, 8ZM1-503, 1WN1-938) (Interactive) 101-9160 914G Wheel Loader and IT14G Integrated Toolcarrier Electrical System (For Serial Numbers 7ZM1-618, 9WM1-1357, 8ZM1-503, 1WN1-938) (Interactive) 101-9160
938G Wheel Loader, IT38G Integrated Toolcarrier Hydraulic System (Interactive) (Machine) 127-9648-02 (Brakes) 143-9472-02 938G Wheel Loader, IT38G Integrated Toolcarrier Hydraulic System (Interactive) (Machine) 127-9648-02 (Brakes) 143-9472-02
768C WHEEL TRACTOR, 769C OFF-HIGHWAY TRUCK & 771C QUARRY TRU Schematic
768C Tractor 769C and 771C Trucks Electrical System, 9X-1142-02 768C Tractor 769C and 771C Trucks Electrical System, 9X-1142-02
772B TRACTOR, 773B TRUCK & 775B QUARRY TRUCK HYDRAULIC SYSTE Schematic
Caterpillar 772B Tractor 773B & 775B Trucks Electrical System Caterpillar 772B Tractor 773B & 775B Trucks Electrical System
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK Body Retaining Pins
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK Body Support (FT1437)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK Front Hood
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.