Usage:
(1) Spring (6N1069):
Assembled length ... 33.96 mm (1.337 in)
Load at assembled length ... 26.01 ± 1.30 N (5.850 ± 7.650 lb)
Operating length (min) ... 25.70 mm (1.012 in)
Load at min operating length ... 37.00 ± 1.85 N (8.320 ± .416 lb)
Free length after test ... 53.52 mm (2.107 in)
Outside diameter ... 10.31 mm (.406 in)
(2) Valve. The bypass opening pressure of valve is to be ... 690 + 110 - 0 kPa (100 + 16 - 0 psi).
(3) Distance the idler shaft is installed below the surface of the body assembly ... 1.0 ± 0.5 mm (.04 ± .02 in).
(4) Diameter of idler shaft ... 12.579 ± 0.008 mm (.4952 ± .0003 in)
(5) Distance from top side of seal to surface of the body after assembly ... 27.22 mm (1.072 in)
(6) Distance from outside face of gear to the end of shaft ... 0.50 ± 0.40 mm (.020 ± .016 in)
(7) Diameter of shaft after plating ... 12.6649 ± 0.0076 mm (.4986 ± .0003 in)
(8) Distance from bottom side of seal to surface of the body after assembly ... 14.61 mm (.575 in)
(9) Fuel inlet port.
(10) Fuel outlet port.