Usage:
1. Lower the blade to the ground.
2. Fasten a hoist to cylinder (2). Remove bolts (1) that hold cap (3) on the rod end of cylinder (2). Remove the cap and the insert from the ballstud.
3. Start the engine. Move the rod end of the cylinder away from the ballstud. Shut off the engine. Remove the insert from the cylinder rod end.
4. Disconnect oil lines (4) and (5) from cylinder (2).
5. Remove bolts (6) and remove cap (7) from the cylinder. Remove the inserts from cap (7) and cylinder (2). Remove blade centershift cylinder (2). The weight of the cylinder is 18 Kg (40 lbs.).
NOTE: The following steps are for installation of blade centershift cylinders.
6. Position blade centershift cylinder (2), inserts and cap (7) on machine and install bolts (6).
NOTE: Install 5P0960 Multipurpose Grease on the inside surfaces of the inserts and the ballstud.
7. Connect oil lines (4) and (5) to cylinder (2).
8. Start the engine. Move the cylinder rod end into position on the insert and ballstud. Position the insert and cap (3) on the ballstud and install bolts (1). Be sure and install 5P0960 Multipurpose Grease on the inside surfaces of the inserts and the ballstud.
9. Shut off the engine and remove the hoist.
10. Fill the hydraulic tank with oil to its correct level. See the Operation and Maintenance Manual.