12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Caterpillar


Centershift Lockplate Bushings

Usage:

Remove And Install Centershift Lockplate Bushing

Start By:

a. remove blade lift bar


Typical Example

1. Remove the bushings from lockplate (1) toward the front of the machine with tooling (A) for 12G, 130G, 140G. For the 120G, use tooling (C).


Typical Example

2. Lower the temperature of the new bushings to -21° C to -32° C (-6° F to -26° F). Install the bushings in the lockplate with tooling (B) for 12G, 130G, 140G. For the 120G, use tooling (D).

NOTE: Some lockplate bushings can have replacements made with the blade lift bar in position on the machine. It will be necessary to put the blade lift bar and centershift lock in a position away from the bushing of which a replacement is to be made.

End By:

a. install blade lift bar

Caterpillar Information System:

12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Blade Lift Bar
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Centershift Lock Control Valve
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Centershift Lock
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Blade Lift Arms
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Ball And Socket Joint Inserts
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Blade Lift Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Front Axle
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Wheel Lean Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Wheel Lean Bar
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Wheel Lean Arms
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Wheel Spindles And Wheel Spindle Housings
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Wheel Spindles
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Blade Sideshift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Blade Centershift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Blade Tip Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Swivel Joint
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Circle Drawbar
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Circle Drive Motor
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Circle Drive
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Hydraulic Tank
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Pump Drive
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Pressure And Flow Compensator Valve
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Hydraulic Pump
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Hydraulic Control Valves
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.