3406B (PEEC) DIESEL TRUCK ENGINE Caterpillar


Timing Position Sensor And Timing Solenoid (BTM)

Usage:

(1) Timing Solenoid (BTM).

(2) 4B4909 Spring.

Length under test force ... 11.68 mm (.460 in)

Test force ... 67 ± 4 N (15 ± 1 lb)

Free length after test ... 19.05 mm (.750 in)

Outside diameter ... 24.701 mm (.9725 in)

(3) Timing Sensor. See Testing and Adjusting section for correct installation.

(4) Nut. Tighten the nut to a torque of ... 55 ± 7 N·m (41 ± 5 lb ft)

(5) O-ring seal.


View A-A

(6) Bell crank. Rotate 190° to wind spring (7) before assembly. Latch with assembly pin.

(7) Spring.

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.