Usage:
(1) Diameter of bearing after assembly ... 50.955 ± 0.072 mm (2.0077 ± .0028 in)
Depth to assemble bearing ... 10 ± 1 mm (.39 ± .04 in)
(2) Pack bearing and housing with 5P960 Grease. Locate bearing outer ring split in horizontal plane.
(3) Apply 7M7456 Bearing Mounting Compound to these surfaces before installing seals.
Later
NOTE: Some earlier models have grease fittings in place of the external lines at the equalizer bar center pin.
(1) Apply 7M7456 Bearing Mounting Compound to these surfaces before installing seals.
(2) Pack bearing and housing with 5P960 Grease. Locate bearing outer ring split in horizontal plane.
(3) Diameter of bearing after assembly ... 50.955 ± 0.072 mm (2.0077 ± .0028 in)
Depth to assemble bearing ... 13 ± 1 mm (.51 ± .04 in)
(4) Torque for two bolts ... 240 ± 40 N·m (175 ± 30 lb ft)
(5) Torque for eight bolts ... 120 ± 20 N·m (90 ± 15 lb ft)