Usage:
These tests are to be performed on an engine that is started for the first time and at recommended check intervals. They consist of quick and easy procedures for each system that can immediately identify if there is a problem in that system with a minimum amount of test time. If a problem is found, go to the correct chart of the more specific troubleshooting procedures.
Check each system of the engine as shown to verify if all components of the shut-off system works properly. To find the correct engine speed, make reference to SPEED SPECIFICATION CHART.
Test I. Overspeed (Air And Fuel Shutoff)
Test II. Normal Shutoff Switch (Fuel Shutoff Only)
Test III. Oil Pressure (Fuel Shutoff Only)
Test IV. Water Temperature (Fuel Shutoff Only)